Recent content by Fungal

OK... so that huge plug arrived that I bought off of Ebay. Holy smokes... what an absolute unit this thing is. The plug itself weighs several pounds, and appears to be very watertight. Even came with all the washers and bolts: I went ahead and ran some 2 AWG battery cables in there, and...

cool... found this bougie-looking plug on Ebay, amidst all the rotten/broken/corroded/clapped-out milsurp ones: I'm going to run a couple of external batteries to ensure I have enough starting amps.

All the fuel leaks have been fixed (after replacing the injector and the injector line). Still won't start. BTW, does anybody know if you can start the genset via that exterior 24v auxiliary port? Can it support the kind of amperage that the starter draws? If so, where would one go to get...

I didn't bleed the line yet, but I will now. I'm also replacing that metal injector line... it's still wanting to leak just a bit around that top fitting.

Once I pulled out that pin, the actuator armed moved freely... and it's doing much better. It's almost starting... you can tell it wants to. So close now.

OK... more incremental progress. Removed the old injector: Side-by-side with the new one: And no leaks once installed! Still won't start. It'll crank now, and no more fuel leaks... but will not start Video:

Yeah... I bought an OEM one, rather than ChinaMart. When tolerances matter, you don't go Chicom.

Yeah... that was my thought too. Somebody has cranked on that before. It's a cheap part. I'm probably better off just replacing it.

Found the leak. Here's the injector, side-view: And here's the leak point (circled in red):

Interesting... explained like that, it makes perfect sense.

The injectors I see online seem to have a gasket associated with them. https://www.ebay.com/itm/155770281975

So we are making progress! Received my replacement starter/solenoid assembly from Ebay, and promptly set about removing the old one. It literally smelled like electric death once I got it out (VERY strong odor of the Magic Smoke (TM) that makes all electronics function) (BTW, thanks to the...

Nice... That gets a bookmark.

Not sure why that didn't come up for me. What search terms did you use? NVM... I see it. Where did you get that particular number?

Which ones are you seeing? The ones I see don't look like they'll fit the genset: they're all 12V 114362-77010 is the part number I searched for. Also tried S114-414A, but all of those I've found are also 12V