Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
ok so I bought a circuit tester and found I had a faulty ground wire. I was able to get both the service lights and break lights working. On that note thank you very much. Now into the windshield wiper motor. I don’t have a reservoir with pump do you think that may have something to do with it?
I can give it a go. Ive been looking for a physical issue because all the switches were replaced with ones that I know work. I was thinking maybe the flasher is bad. I’ll pick up a tester and try it out I’m just not confident in my ability to adequately diagnose an electric issue. I guess...
Yes and yes, I can run through the wiring again maybe I missed something. Fifth time is the charm. The brake switch has been adjusted to where you can hear it engage when pressing on the break and it’s a new switch. But still doesn’t explainwhy I have no rear lights other than turn signals and...
Here is my issue, I have replaced the break switch, light switch, turn signal switch and rear lights on my M1097A2. The turn signals work but the service lights and the break lights won’t come on. Also there is no power to the windshield wiper motor. Is there anything else I can do to trouble...
Hello,
as you can tell by the title I’m having issues with my humvee stop lights. The blinkers and four way works but the brake lights do not come on. I’ve tried everything from changing the bulbs, changing out the entire light, changing the light switch, and changing the brake switch.I’m...