• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Guyfang's latest activity

  • Guyfang
    Guyfang replied to the thread MEP-114A GPU.
    Do not forget the Day tank. And when its out, test the FL-1 and FL-2 on the float switch. Been there and done that with a full fuel...
  • Guyfang
    Guyfang reacted to 2Pbfeet's post in the thread Mep 831A load issues with Like Like.
    That video with the return fuel line not connected and SeaFoam sounds like a much better behaved engine to me. How was the smoke? To me...
  • Guyfang
    Guyfang replied to the thread Mep 831A load issues.
    To answer the injector test question, yes, that's sort of how to do it on the machine, but I would do something so you aren't spraying...
  • Guyfang
    Guyfang reacted to 2Pbfeet's post in the thread Mep 831A load issues with Like Like.
    To answer the injector test question, yes, that's sort of how to do it on the machine, but I would do something so you aren't spraying...
  • Guyfang
    Guyfang reacted to kloppk's post in the thread MEP-803A Low Voltage with Like Like.
    I'd say the A1 AC Voltage Regulator is bad based on your readings.
  • Guyfang
    Guyfang reacted to LuckeyD's post in the thread MEP-1050 Fault Code 3665 with Like Like.
    Good Day: S12 looks good, (sometimes these do go bad so move them a couple times) but if the DCS still indicated the 3665 error, you...
  • Guyfang
    Guyfang reacted to LuckeyD's post in the thread Mag Pickup repairs on my MEP804 a with Like Like.
    Well, you can try the procedures starting on page 2-306 and ending on page 2-307 and hopefully that one turn will clear the flywheel...
  • Guyfang
    Guyfang replied to the thread MEP-114A GPU.
    No Bus fuse, no battery charging. The set runs on 28 VDC, so if the battery charging alternator is non op, and the batteries are low...
  • Guyfang
    Guyfang reacted to Scoobyshep's post in the thread MEP-114A GPU with Like Like.
    There are off the shelf options available that will function however tearing the existing pumps apart and cleaning them cost you maybe a...
  • Guyfang
    Guyfang reacted to wgtactical's post in the thread Journey complete, 52 years later... with Like Like.
    Been a while since we updated the Blood Sweat and Tears search. As it turns out, the reason nobody remembers "Blood Sweat and Tears" is...
  • Guyfang
    Guyfang reacted to Scoobyshep's post in the thread MEP-114A GPU with Like Like.
    Well it's good to keep in mind the overall list of things to do first things first we need to get the engine stable Sent from my...
  • Guyfang
    Guyfang replied to the thread MEP-114A GPU.
    So you are still going to need the main gen to provide voltage to the Hobart box.
  • Guyfang
    Guyfang replied to the thread MEP-114A GPU.
    Thats what it looks like to me. You might even get the maintenance manual and schematics from Hobart. But thats not something I have...
  • Guyfang
    Guyfang replied to the thread MEP-114A GPU.
    Then there is no need to fool with the Main gen and excitation system. Or not?
  • Guyfang
    TM 9-5130-338-12&P dated 1997 TECHNICAL MANUAL, OPERATOR'S AND UNIT MAINTENANCE MANUAL, (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)...
Top