Recent content by Heavy D.

I have deleted all CTIS components many moons ago.

Please forgive me if this has been discussed, but Is there an inner tube that can be used with the stock M35A3 wheel? From what I can tell, the CTIS set up of the rim makes it a bit different with the routing of the stem. I am just burnt out on battling my old leaky wheels and have been...

Long story short, 10 years ago when i was young and dumb i took my A3 through deep water and blew my fan apart. I have long since replaced it however my fan clutch control valve has failed and i had jerry rigged the fan to have 0 air pressure making it run continuously. Today i added a 2 way...

IN

Wait really? That is great news because A2 Bearings are like 1/5 the price of an A3. Wouldn’t even matter to me since I disabled CTIS on mine anyway.

Thank you, I will check on all you have suggested.

I have this issue as well, is the speedo cable supposed to have oil in it for lubrication and a seal on the speedo failed? Either way my speedo stopped working all together recently so I will likely be replacing both.

Noticed high oil pressure at approximately 65 PSI start up while idling on a 90 degree day, under load while driving the stock gauge pegs out. Today I hooked up a mechanical gauge and got about 55 PSI. during revs up to 2600 rpm it reached 100 PSI under no load. I haven't tested it while...

Indeed Ollied is sheltering Heavy D. Until I return. Thank you everybody for offering your assistance. I look forward to paying it forward with your future needs.

Thank you everyone for your generosity! I am going to bump this one more time and see if anybody else is a little closer. If not I would like to take Ollied up on his offer if it still stands. Again thank you thank you everyone for your willingness to help!

Hello everyone, I am in the Coast Guard currently assigned here in the NYC area. I am transferring to Kodiak Alaska for the next 3 years. I cannot bring my beloved M35A3 with me without paying a fortune. I don't know anyone that has any room for it. Is there anybody out there within 50 miles...

So I went to change out the shocks on my M35A3 prior to the parade with ones I ordered years ago. Come to find out I ordered ones for the M35A2... So anybody coming to the parade want the pair of OEM shocks for a great low price of 20 bucks?

Hello emr, I am in if you will allow. Just also wanted to make sure you got my email with contact info too. Thanks!

I haven't posted in a while, and I had this same symptom on my own thread that I have not followed up on yet. I had it looked at by a pro, and he determined that it was not oil but fuel. Thinking about it they look a bit similar to someone not too familiar. Anyways the problem was the fuel...

Mine is actually engaged all the time, so my clutch isnt bad according to the no air test. what could it be that makes it always engaged???