• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Recent content by hellrayzor1

  1. hellrayzor1

    msrp 1984 m923

    or 2320 01 206 4087
  2. hellrayzor1

    msrp 1984 m923

    2320 01 230 0307 and thank you very much
  3. hellrayzor1

    msrp 1984 m923

    anyone know the original price for a 1984 m923? and where to look it up? need for arizona dmv
  4. hellrayzor1

    tire wearing uneven

    I replaced the shocks and rotated the tires and have since made 2 trips up north in Az (about 300 mile round trip each) Tire wear is even now and am not having the choppy tread wear I was having before. One of the shocks I took off (driver's side) was almost completely froze up. Also the truck...
  5. hellrayzor1

    tire wearing uneven

    Thanks for all the great information people. Am going down to Napa after I post this and order a new set of front shocks and then rotate a tire from the back up to the front and see how that goes. I checked the toe in and tire pressure and all is to spec. I'm headed up north again in 2 weeks...
  6. hellrayzor1

    tire wearing uneven

    It just seems strange that only the passenger side tire wears funny and not both front tires.
  7. hellrayzor1

    tire wearing uneven

    Tire pressure is to spec and checked weekly
  8. hellrayzor1

    tire wearing uneven

    It is just one side and it wore down in a very short time, I have had these tires on for about 2k miles and never rotated them and all was looking good until the last 2 trips up north I made, about 200 miles each trip. I'm pretty sure I could use new shocks but would that cause such extreme wear...
  9. hellrayzor1

    tire wearing uneven

    Hi all, I am having a tire wear issue I am sure many of you could give me great advice to repair. The outside tread on the passenger side front tire only is wearing down fast and cupping. Attached are a couple photos that I hope are good enough to show the problem. This happened in about...
  10. hellrayzor1

    Deuce brake problem Help needed.

    Possibly be a bad MC? I have bought rebuilt ones in the past and had em die almost immediately. Poor workmanship happens if you got it from a parts store. Might want to barely crack a easier to get to wheel cylinder or even the airpack bleeder and give the pedal a pump and see if any fluid is...
  11. hellrayzor1

    Deuce brake problem Help needed.

    Have you tried bleeding the brakes again? Maybe the first time you didn't get all the air out and it has worked its way to a critical area. Just a thought. Also would check the fluid level in the MC again. PalmerBS I believe the vent tube is needed. It vents the MC and also keeps water and...
  12. hellrayzor1

    M35A3 super shimmy!

    Just replace the A3 with a good ol reliable A2, problem solved rofl
  13. hellrayzor1

    Trying to modify my Deuce to tow a U-haul, inexpensively

    I added a reese hitch under my truck so I can pull my car trailer with it, the only problem I have is running a 12 volt trailer behind a 24 volt truck the bulbs glow really brite but not very long. You will wipe out the bulbs in a Uhaul trailer in the first couple miles. I am trying to figure...
  14. hellrayzor1

    Deuce bed weight?

    I don't know the wieght but it cant be too extreme. I have taken mine off too many times already doing frame mods and paint. I use a cherry picker (engine hoist) on each side in the middle and hook to a chain run down the center stake hole . Balances out fairly well, the tailgate adds just a bit...
  15. hellrayzor1

    Another Brake Modification

    I have never had any problems with my brakes but I have tested downshifting and applying the parking brake just so I know I can bring it to a fairly fast stop if I ever do experience total brake failure. It is pretty easy to bring it to a stop using this method, unless your on a downhill from...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks