Recent content by icer97

No problem Ive done a lot of searching and digging to the point my head is spinning. I originally was just going to size up a freeze plug to install for under a $1 and like you I cant imagine there being much pressure on the lube side back there so id think a freeze plug would be just fine. I...

I found the GM part number for the lube orifice cup plug. For the solid plug for the 4x4 housing without the orifice you want GM part number 9427692. For the guys wanting to convert the other way and convert a 4x4 transmission into a 2wd and wanting the orifice hole in their plug for the 2wd...

I had a guy on another forum that's done the 2wd to 4wd conversion tell me to make sure to plug the drain hole in the rear housing also. He said he popped out the plug with the hole and took it up to the local parts store and sized it up to some freeze plugs until he found one close to size to...

brazengoat06 I am also doing the swap as we speak in my cucv and also have a 2wd 4l80e transmission. My output shaft is the 6.5in fully splined so I plan to cut my shaft down to length rather then tearing it down to replace it with a 4x4 output shaft. I plan to run my 208 and see about having...

Im wondering if anyone here is around Fort Hood or knows of anyone that could retrieve and store a item until I can get there to pick up or set up transportation. I can send some funds for the leg work. Thanks

Welcome from Northeast Mo. Anything you would ever need to know about your new rig you can find here. Im a newbie also, and have already had several questions answered to me by searching for the answer here.

​I found one and got it bought last night. It was owned by the Perry Mo. Volunteer fire department. Truck is pretty slick, rust free. The truck does have some dents but no major creases. I think most dents can be for the most part popped out. Truck came from Fort Leonard Wood about 4 years ago...

Just wanted to say hey. I owned a M1008 years ago and im looking for another CUCV now. Ive found several here in Missouri but they all have cab corners gone and no rockers left. Im now looking at heading west after one to find a clean one. This site is full of info. I wished I had knew of it...