Recent content by jeffro589

Thanks for the replies everyone i will try bleeding later today.

Hey guys, I replaced the steering gear, pump, and lines on my 1008 over the course of a few days. Now the assist feels very strange and hard braking the pedal returns slowly. I'm really just looking for someone to go out to their truck and take a few pictures of where the lines go between the...

Update when it does it I have to stop put the trans in neutral shift into 4wd low then shift back to 2 we and it's fine any ideas

Hey guys I'm stuck on the side of the road right now in my 84 1008 I was driving at about 50 mph and all the sudden it was like somebody put the truck in neutral so I pulled over put it in park it made like a grinding sound in park like when you put a vehicle in park while it's still moving shut...

Hey guys, I am trying to find a throttle position sensor for my 84 m1009 everywhere I've called or looked they show an electrical one and mine is the vaccum type so if anyone has a part# or knows where to find these you would be a big help thanks

Well I just assumed the gauge was right and you know what happens when u assume....

Ok so turns out my fuel gauge doesn't read right a quarter tank on the gauge means empty in the tank so I'm guessing i ran out of fuel and damaged the injector pump to the point that it can't build enough pressure to open the injectors I will pull an injector out tomorrow and verify they are not...

Ok guys I'm getting really frusterated this thing still won't start I've bled everything I even dumped 5 gallons of fresh fuel in I'm getting good pressure from the lift pump and when I break the injector lines I get a little drip anybody got any other ideas?

Ok I have 4 of the injector lines completely off when cranking little drops of fuel just barely come out also can someone give me a little more info on this check valve thanks.

Mistaken1 can u go a little more in depth about the checkball did a search on here and couldn't find much that's about the only thing I didn't check

That's kind of what I'm thinking any idea what he sells the pumps for I've been looking around for a decent price

Alright I have good fuel at the lift pump going to the injector pump but no fuel coming out at the injectors I have 4 of the investor lines off the most that comes out is a little dribble of fuel any ideas?

alright the trucks at my work ill try the jar of fuel thing when i get there also ill try to bleed the lines again thanks guys.

Followed the procedure to a T it almost wants to start it will run for a few seconds and stall and for those few seconds it is real rough

No easy fix this time changes the fuel filter bled the system no more air bubbles coming out but it still won't run still feel like this is a fuel issue how do I test the injector pump?