Recent content by Jgarlock92

Sounds good, i think I'll do the bypass from the front battery with an inline fuse or breaker. Thanks for the advice guys!

Also, if i do bypass the resistor for the 12v setup are the 60g's the best option as far as plugs go?

Ok, so, one last question. I had ordered a set of 24v plugs that will fit this "well, 19-21v operating range" Is there any downside to leaving it as the 24v going straight to these 24v plugs? Is there any benefit to bypassing the resistors and running the 12v straight to new 12v plugs? I...

Hey, i can see about some pictures in a bit, its the M1009 blazer. We aren't running a relay currently, we have a 24v wire going to a solenoid and a push button in the cab to activate the solenoid and send the voltage to the plugs.

Hey guys, so I am working on this k5 that someone has done a lot of rigging on, they bypassed the glow plug system and installed a push button switch and solenoid to enact the plugs, but we are burning through plugs like crazy and are getting straight 24 volts at the plugs. I know that they...