Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
I used to run the stock military tires and wheels with runflats and I would always get a bad vibration right around 70mph. I tried centramatics and even balancing the old wheels on a dynamic balancer, but I could never get the vibration to stop. No vibration with the new setup at 70mph. It...
Thanks! I swapped out the original 6.2L/TH400 for a Duramax/Allison combo, and had to install a 3” body lift to get clearance for the turbo intercooler pipes.
I ended up going with the Black Rhino Armory wheels with +6 offset and 37" Nitto Ridge Grapplers. The wheel/tire combo fits well and doesn't project much beyond the wheel wells. There's a tremendous improvement in ride quality with this setup over the stock military tires and wheels.
I'm considering getting the Black Rhino Armory wheels. Several members have posted that they purchased the wheels with the -18mm offset. The wheel manufacturer shows a -18mm offset and a +6 offset available. Wouldn't the +6mm offset provide less of a tire projection outside of the wheel well...
I have an 89 M998 that was rebuilt by VSE in 2012. They tore the vehicle down to the frame, re-painted the entire truck, and replaced any parts that were out of spec. They upgraded the brakes and hydroboost, installed a 200 amp alternator, and performed 6 Modification Work Orders or "MWO"'s...
Check the old gear to see if you have a check valve in the high pressure port. If you do, then the new unit likely wont have one, and you may need to get the new check valve and install it. My old unit had the check valve, and when I installed the new unit without the check valve, I didn't...
Just received the following email from Rosco:
The more square mirror was made by Mirror Lite in the 2008 – 2012 time frame, then Rosco purchased Mirror Lite, and stopped producing that model in lieu of our model which is the more rounded and stocked by Kascar.
I don’t think you will find any...
I called Rosco and they told me to call Kascar. The salesperson didn't seem to understand the difference in style between the rounded corner and squared corner HMMWV mirrors. I emailed Mirror Lite but haven't received a response. The mirror is described as a 12" x 8" west coast style mirror...
I bought the Harbor Freight 12 Ton Jack Stands. They work well, but the Tractor supply jack stands with built in bottle jack look like a great idea. What type of jack are you using? I've been using the low profile high lift Daytona Jack from Harbor freight with a 4x4 spacer. Most jacks don't...