Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Most of the time that I have issues with mine not running it is the filters are plugged. The return lines are leaking (letting air into the system) along with a week or none functioning in tank pump.
I do not know where to get the plates but after i did mine one of the bolts that hold the plate on fell out. Anyone know what the bolt is. I can not find a replacement locally.
Has the thread that contains the plans for an automatic backup light switch been removed i could not find it in the search (not my friend ), but did find a thread that linked back to it. This link did not work.
If it has been removed does anyone still have the plans and how to.
If it still...
I have read several post on replacing the rear main seal in a M35A2, but none of them said before you start you should get these parts and have this ready.
Can some of you that have done this before give a list of parts (part numbers) and tools that you should have on hand when starting?
If...
Did u ask if they would do a bolt on replacement? After all they are already working on other military trucks. It might be a nice side project for someone there.
I pulled the lines at starting at the tank to see where I started to have problems. Finally when i got to the line that goes into the secondary filter I was able to catch the fuel well enough that I could let it run. And it started out strong and then just dwindeled to very little flow. I...
One of the first things that I did was pull the in tank pump, I seem to have a lot of problems with the in tank pump. I put it in a bucket of water and plugged it in. It pumped the water out. Maybe this is not the proper way to check it. I do have anouther pump that the bottom fell off of...