• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Recent content by justacitizen

  1. J

    need help with 003A

    Hello GuyFang I envy your expert use of the manuals and how to read them. i get lost in the fog sometimes. also Thank You Very Much for posting that information.... it will prove very useful. I will get the serial numbers and return
  2. J

    need help with 003A

    Thank You Ray70 I haven't yet positively identified the main breaker as correct to the 003A. i have read conflicting opinions that the main breaker on the 003A and 002A are the same but have a different trip setting???? how do i confirm the breaker? is the adjustable pot in the AC box where...
  3. J

    need help with 003A

    the momentary start amps measured 89 amps. the run amps are 25. this is measured on main power. measured with a fluke at the unit location
  4. J

    need help with 003A

    i have an MEP 003A that runs strong and carry a resistive load fine but it won't start the ac condenser unit. the main breaker trips instantaneously. i installed a soft start on the unit but it made no difference. i read the whole thread about the main breakers and have done a little work to...
  5. J

    FLU419 SEE HMMH HME Owners group

    it's not that difficult smart ass! you can figure it out for yourself
  6. J

    FLU419 SEE HMMH HME Owners group

    https://www.baileysonline.com/ try a real logger supply. if you know the pitch and number of links getting chain isn't a problem. neither is the bar.
  7. J

    Generator to charge vehicles, Hummer Ford Tesla Volt

    just looking at this in a different angle. would a cheap used gasoline or diesel powered car keep you mobile until utility power is restored?
  8. J

    MEP-003A

    https://www.steelsoldiers.com/threads/mep-002a-governor-linkage-broken.75575/
  9. J

    MEP-003A

    https://www.thingiverse.com/thing:373769
  10. J

    MEP-003A stalling under high load test?

    does the set have alternative fuel in it????
  11. J

    MEP-003A stalling under high load test?

    sounds like you found it. take that injector and swap with another to see if the problem persists in that cyl. adjust the valves first though.
  12. J

    MEP-003A stalling under high load test?

    i have used one of those laser thermometer to look at each cyl at startup and again afer load. a cool cyl usually means a problem in that area.
  13. J

    MEP-003A stalling under high load test?

    in my opinion... i would check that little control linke age that runs from the governor arm to the fuel control arm on the fuel pump. then adjust the valves
  14. J

    MEP-026 brass float

    my favorite quote is. "as useful as tits on a boar hog".
  15. J

    MEP-026 brass float

    also need to know how you expect to be paid? reminder
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks