• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Recent content by ktm25089

  1. K

    newbe M1008 questions

    so,for the cooling,i have only to fill the radiator and the expansion tank on the mark and start the engine?check again and that's all??
  2. K

    newbe M1008 questions

    newbie hit again!!!!! Please can you tell me if there is a drain plug to the fuel tank to drain the old diesel mixed with water!!!!??????????? Is there a plug,bolt,valve or something in the engine to take the trapped air out of the cooling system?I just changed the lower radiator hose and...
  3. K

    newbe M1008 questions

    Ok,after some quick repairs,change fluids the truck started without the help of any spay etc.Idles steady and revs good.One small problem if i will press the gas pedal a little faster the engine revs but when i will left the pedal it stops.Why this? as i see the engine from the front which is...
  4. K

    newbe M1008 questions

    you mean starting spray?yes i know.i will not again
  5. K

    newbe M1008 questions

    from left to right: i jump wired the yellow circle item and heard the "click" shut off solenoid? when i jump wired the blue item no movement (is this normal?)cold advance solenoid? what is the item in the black circle?throttle position sensor? second photo we have 12v posotive on the yellow...
  6. K

    newbe M1008 questions

    Hello, I just received my new toy.M1008 ex-Greek army.I'm new to this truck and very new to diesels.I'm machinist and have a complete shop. I've made a quick search and downloaded all the manuals that i found for this truck.But because i'm new to diesel i confused a little.I will post some...
  7. K

    checking alternators

    Hello, i;m in progress restoring one for a friend.The car had to start for 6 years.After a all fluid change it started again.Gen1 lamp keep light.gen2 light i think its burnt.The questions are simple and silly but please help me.I have made a search but i confused a little. they are 2...
  8. K

    ignition switch for M1008

    can you help me little more?This typeof vehicles isn't my type.I'm working on jeep's.So,what type i have to search for? Thanks Georg
  9. K

    ignition switch for M1008

    Hello, please can you tell me where can i found one ignition switch for M1008?I'm from greece and it's little difficult here to find parts. Thanks George
  10. K

    zippered front axle seal

    Hello, please can you tell me a dealer to find the zippered front axle seals?I'm from Greece.So if you can provide me with a website it will be great for me Thank you George
  11. K

    M725 carb??

    Hello everyone from Greece I have here a restored M725 truck.The truck is all original,sandblasted and painted.I'm in searching to gain some power from the engine.I dont care for the originality in some parts on the engine bay.So here are my questions, 1)Can i change the carb with something...
  12. K

    multifuel engine manual?

    Thanks for the good words about the collection Where can i found the three filters?any supplier?I dont know anything about this vehicle.Trying to get some info.....
  13. K

    multifuel engine manual?

    Hello, im new here and have some questions.We have here in Greece a truck with the multifuel engine.The engine works but now steady.It can not hold steady idle but not stalls.And sometimes it looses power on acceleration.I want to find a manual in PDF to see things about this engine and how to...
  14. K

    fuel pump pressure

    Hello, what is the correct fuel pump pressure?and in how many rpm's to read it? Thanks George
  15. K

    m715 carb

    Can anyone please tell me what is the correct fuel pump pressure?To see if i need to rebuild the pump? Thanks George
Top