Recent content by mil alta

4940-01-246-6819 Spares Facility 4940012466819 012466819 02-2731539-1 AN/TSM-183

Thanks for you help I've read many of your posts and download many TM hoping to find wiring info My NSN # is scratched off (at least the first of it) Also there is a radio mount tray with an antenna (looks like a dipole) that just goes into the wall and can't find where it comes out ??? any idea

thanks kinda what i was thinking on the door item too have spent hours looking for info on the wiring but so many different configuration options guess best way is to start tracing wires and sorting components

Have a S-250 AN/TSM-183 and looking for information as where to start. Putting in a M-1102 hauled by my HMMWV Can't find any info on the electrical system. Looks like a 240 volt input down to 120 volt with an inverter to 12 or 24 volts.. Says it has a heater but I don't see it unless it's in...

suggested fluid change any other ideas

Have m998 that has this marking written on the bottom cover of the transmission. Know the work was done 9/14 which should put it military service. Any thoughts of what that funky symbol means. Know it's not a Happy Hippo..... (as suggested)

The three layers front layer you remove to put in place on the body. The back layer you remove leaving the stencil on the body. Mask the stencil and spray the exposed area the after you remove the stencil and you have the painted letters on the body

I've got a cutter myself and been making stencils. Just a footnote: If making a stencil with a cutter using normal vinyl and just reversing the vinyl removal (reversing it) you will probably encounter a problem removing the stencil once applied as it will take the vehicle paint with it...

Looking for anyone that has physical or electronic manuals for a Canadian 5/4 ton. Greatly appreciate any help finding Sorry if the paint job offends anyone ...DID NOT DO IT !!

This is great info guys. This is what S/S all about. Love knowing the history about a vehicle. "crapgame" see what I can do to get you a couple "law" tubes. Found some but been working at getting them for some time but hopeful. Thanks again

no problem do as soon as I can

Looking for my Hmmwv history from the bumper numbers. The rights side is easy (only painted once) which is "HQ 107" 1.5 inches letters. (Headquarters' 107th vehicle) The right side appears to be painted twice ( one 1.5 lettering one 3/4 " lettering) the 1.5" rear starts with a 28 ( 28th...

Thanks guys for all the info. I also put in a relay so that when my headlights are turned on high the auxiliary lights come on (for driving back roads) and when I dim my lights my aux. lights go off automatically. Then I added a toggle switch that take out the relay so the high low works normal...

Found another setup from Federal Military Parts. These might be another idea

Those are exactly what I'm trying to do. My questions would be: Are those ones flush mounted? (little to bright to see) How many watts? Does the light strength work for you (bright enough)? Where did you locate them? Saw some 3 1/2 flush on ebay but only 24 w each. Can't see any mention of...