Recent content by mmwb

Thanks guys!

I need a drivers side window regulator for a 1976 M880. 77-78 regulators are a dime a dozen, but I can't find a manual regulator for my truck. Saturn supply lists one, but they don't respond to my emails. Suggestions?

Last year I picked up a 76, and 77, M880s. The 77 ran, but very poorly and was rough. The 76 didn't run, but appeared to be in far better shape. The idea was to build a plow truck that would last me a few years. Thanks to copious advice, I was able to get it up and running. I'm winding down the...

I ended up picking up a military rebuilt axle, as well as a rebuilt transmission. Took care of the problem. Appreciate all the input I received.

How much are you asking for these items, what is the zip up there, and how much are you asking for each?

Well its been awhile, but I finally got a good look under there. The ujoints actually look good. I can't discern free play in any of the ujoints, though there appears to be everywhere else. There is a bit of free play in both the front and rear differentials, there is some free play between...

I'm not having much luck with may lights right now (76 m880). It might help if I knew what all of the BO settings are supposed to do. I'll state what I get on the settings and maybe someone can tell me what it is supposed to do. The TOP switch: BO Drive---I get front and rear BO markers...

Appreciate the replies. My understanding is that if a wheel slips on one axle, that putting it in LOC will allow the other axle to engage anyway. Is that correct? We'll see on the mileage. I am toying with installing an RV cam for more torque, keeping the carter carb--but with a better...

Still trying to figure the beast out. '76 M880. Did these come with limited slip or open differentials?

I did replace it, and the tank. I've parts truck and both the sending unit and tank were in good shape in it.

I assume my 76 m880 has a Dana 60 in the rear. The thing has a significant clunk when shifting between reverse and drive. Was this normally a fairly tight axle? I've a parts truck I could switch axles with (assuming it is in any better shape). I don't think I've the know how or tools to...

My 76 m880 idles nicely (purrs like a kitten) and seems consistent at varying speeds, but it is rather gutless. I realize these things were never power horses from the factory, but it seems to me that the 318 should put a bit more umph out... My 90 k1500 and 96 f150 both totally put this beast...

I'm new to old dodges myself so am yet familiarizing myself with my m880, but trouble shooting procedures will be mostly universal. Do you have juice through the socket? Do you have a ground? Is a fuse blown? Connections good at all points? Does the sending unit work? etc... Just start...

Yeah, the back window is a bit thin, but is the clearest I've ever seen...lol The part's truck will be making a donation there. What is odd about the Alt gauge? Is this the gauge that is infamous for frying the whole cluster? I like alt meters. Is there a fail safe way to wire it in to avoid...

Now that I know my Beast will run fine, I dropped the tank. I would guess it had between five and ten gallons of the nastiest brownish-orange, sour gas in it! I pulled the sending unit and emptied the bloody fool thing out the best I could. Any tricks to get the remaining pint or so out? It...