Recent content by Nathanater

It's best to find a donor vehicle to pull all the parts you need. Everything from the 6.5 should transfer over to a 6.2. Oil to turbo line and the drain, headers, crossover pipe, and intake. Sent from my iPhone using Tapatalk

Do you have any pics of your setup and any pics that would help with doing the install? About two weeks ago my box filter was leaking from the lowest hole and I had to run get a replacement filter before I loaded it up on a trailer to head to the river. A spin on filter would be great and I know...

I can see the pics too. On tap talk on iPhone.

18° out. Let the glow plugs warm up a little longer and it fired up fast. My problem is fixed.

I drove it to work yesterday and the wait to start light has been working fine. I wait about 5-10 seconds before I hit the starter. It starts better than it EVER has! https://vimeo.com/119693184

changed the glow plugs today and it started right up really easy! Waited till the wait light went off. The glow plugs came out really easy. Just checked it after its sat for about five hours and the wait light didn't turn on and when it disengaged the glow plugs it clicked on and off like it...

So I've noticed with my M1009 that it won't start unless I put a 12v 50amp battery charge on the front battery. The resister is bypassed. The glow plugs cycle a lot faster with the extra power on the front battery. It won't start without it unless it's already been running. When I tried it...

Haha. The seat works well enough and has great ventilation for super hot days. Kinda have to "know" how to sit in it but it'll make you a little stiff after a day of wheeling. I have a set of seats out of a dodge to put in there but I haven't had time to fab up the mounts or even think about...

Very nice. I used some ammo cans to mount speakers in my M1009.

They don't rub all the time but flexed, it's really bad. I have tread missing from rubbing the fenders and the fenders are pretty messed up now too. It's worse on the drivers side than the passenger side.

4" lift. Off road they rub the fenders really bad in the front. No issues in the back. I removed the sway bar which made the tires rub more. 33" On road there are no issues so it depends on what you are going to do with your truck.

****! I spent $112 on the same gauge from amazon! Oh well it works. Non turbo 6.2 I've gotten my egt to 1450

I've patched my floor! Works pretty well for what it is. EVENTUALLY I'll fix it right but time and $ are factors right now.

But I'm looking at doing it. Unless I find a donor truck.

I read that the 4L60 is just a renamed 700R4. Other than the controller, what's the difference?