• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

NDT's latest activity

  • NDT
    NDT reacted to Coug's post in the thread BATTERY CHARGER FRIED STUFF...??? with Like Like.
    If it was incorrectly hooked up, was the wrong type, or wrong voltage, then yes, it is possible to fry the start box. Typically they...
  • NDT
    NDT replied to the thread hood markings.
    These are not tactical or unit markings, they are related to long term storage. For example C/C means condition code. I can’t read...
  • NDT
    NDT reacted to Guyfang's post in the thread MEP026C 28 volts 109 amps good for what? with Like Like.
    Thats good. Because without the solid state ignition, the reliability of the engine is much reduced. I hated this engine before the...
  • NDT
    NDT replied to the thread MEP026C 28 volts 109 amps good for what?.
    Yes it does. I will pick it up tomorrow and get some pictures. It turns over and is all there, that’s all I know at this point.
  • NDT
    NDT posted the thread MEP026C 28 volts 109 amps good for what? in Generators.
    I ran across one of these. OK I know it's gas and loud. Is this usable for some kind of solar battery bank backup recharge generator...
  • NDT
    NDT replied to the thread 1971 M151A2 will still not start (2nd engine).
    If it runs on starting fluid, that rules out ignition and compression, valves etc. Must be fuel related. Maybe the carb float is...
  • NDT
    NDT replied to the thread coil.
    Those 80 yr old Delco coils still work great! Check your points and condenser first.
  • NDT
    NDT replied to the thread M816 Brake issue.
    Make sure the front service gladhand cover has a vent and the line is not capped off.
  • NDT
    NDT replied to the thread M816 Brake issue.
    Which glad hand? Front or rear? The front is which will cause this.
  • NDT
    NDT replied to the thread Priming the oil system after hibernation.
    I've always cranked for a few seconds with the engine stop pulled out. Still takes a few more seconds for pressure to register on the...
  • NDT
    NDT reacted to Abram80's post in the thread M1165 ready for pick - Questions with Like Like.
    Things had been extremely busy, so never got a chance to come back and update. Everything went well. I wanted to give a huge shoutout to...
  • NDT
    NDT replied to the thread Transmission stalling engine shortly after start up - Advice?.
    Very unusual. What brought you to the diagnosis of the transmission being at fault? Could the engine be dying on its own...
  • NDT
    NDT reacted to KallyLC's post in the thread Please help identify this trailer with Like Like.
    Looks like an M332 ammo trailer, missing the box on the tongue though.
  • NDT
    NDT replied to the thread HMMWV A2 vs A1 Starter Troubleshooting.
    Suggest you get under the truck with your voltmeter and see what ya got. Do you have 24 volts at the starter? Do you have 24 volts at...
  • NDT
    NDT replied to the thread M35/51.
    I used that same starting technique to fire up my D7-7M dozer using my M275A2 tractor, how I was not killed doing that I will never know.
Show older items
113,450members
166,716threads
2,347,375posts
1,357online users
Top