Recent content by Oldsouthernboy

I am working on my lift for my M1028 and I am about done. I bought some 12 bolt hummer rims, Had the front plate CNC machined to remove the lug holes and part of the front dish so I can weld in the new stamped centers on the rim. I Have a great set of all most new 37 radials plus the PVC...

If you want to buy a weather proof, cover with a hinged to made from fiberglass, Sierra 4x4 Mfr makes one. The cost is high a a grand plus shipping, but very nice and will be great to keep things dry.

Ahh well your your M416 is to much of a bother or your worried about towing. I will give the trailer a loving home and take good care of it I promise to use it and take good care of the trailer.

I am looking for some m416 parts, I have found what I need, but they are on Ebay, The sell is some one Called GOVSURP and are located in Croley, PA. I do not like ebay but need parts does any one know who this is and how I can reach him?

I am doing a 6 inch lift on my 1028, I want to replace my tires with recentered Hummer tires but all I can find a quite expensive. I need a good source for rims and tires who will not skin me to bad, I do not have much skin left from buying parts and having the work done.

IF you have a bad seal between you trans and transfer case, you will pump your fluid from the transfer case into your transmission.

The base is okay, but the fuel presser sensor cracks. If this is the case, take the base off the truck, remove the sensor. Find a freeze plug that size and press in the body to take the place of the sensor. The sensor is there only for the Staice testing unit.

Sounds like you have a fuel filter base problem, in your base you have a fuel pressure swicth that can crack and not leak fuel, but allow air to enter system. do a quick easy by pass of the filter and after starting the problem goes away that is the answer. Then you check the threads and do a...

I have a M1028 that I am doing catch up maintaine on all I have to do now is replace the fuel filter with a up graded system. This truck with the overload springs and the front locker will get you about any place you want. I making this into a trail vehicle so I have added a Hummer winch on the...

yes that is the place never could spell

Look at the Denham plantain about two hours east of Atlanta, Near woodville Ga, where the rally was in October. This has lots of trails from mild to wild. Lots of mud this time of year and have a winch close by if you want mud.. PS when you get ready drop me a line and I will tail ride with you...

try a metal rod with a L bend on the end a half inch l and round the end off. gently work the edges of the deform in back an forth motion. this will flow the metal back as long as it not to large. Use a straight edge to keep from gong from a neg deform to a pos deform. Also a light a 45 deg will...

I see that this thread has came back. I now have both winches mounted and in full operation. I was pulling some pine trees out of a pond and had to have a tractor come in and anchor me off before I pulled my self into the water. Hummer winches at 10,500 pull in the first wrap of cable. One...

I need some specter fuel and water cans if some one has some give me a price holler, if not to costly i will take quite a few of both, and hold a spout or two for me.

Sure am be there Thursday sometime.