Recent content by Pajaro

Thanks country, I appreciate the links and info. This WILL be the route I am taking. CTIS did not work anyway...

Great advice. Going through the same thing. Inner bearings are 450 each! THX!

Great advice and lots of help. THANK YOU Warthog.

I checked and you are correct. Great forum! Thank you all for the help!

Thanks for the quick reply! Is the shutterstat a hard to find item? Is there a way to t-shoot it or just replace it??

Thanks for the info and the link to the TM! So the air locks it in or out you say? You mean it makes it direct drive and not free wheeling?? Where does one get a shutter valve? I believe this is a 425 CAT. Probably a CAT dealer item?? I will look at theTM. Thx again for the help!

Can someone please tell me how the air driven cooling fan is suppossed to work and how to t-shoot it? I have 95' M35A3 and the fan is driven by the belt, but there is an air line running to the fan hub in the front? The fan never speeds up unless the engine RPM's do. The motor gets up around 240...

Can I get some advice on the cooling fan? I have a 95' M35A3 cooling fan issue. It appears there is an air driven clutch or motor on the fan hsng, however the fan speed never increases other than with engine RPM's. It gets up around 240 degrees at times and it seems to me the fan clutch shouild...

Good advice on the o-ring's I have the same issue on my 1993 M35A3 WO/W. Just spent better part of an hour airing up 6 tires. New to the site. Good information here. Very little BS. Refreshing! Thanks guys!