Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
I have converted my headlights to LED a and now want to do the turn signals, markers and brake lights. Do I need to change the flasher or it still work?
Thanks for the info. I searched the same way and just got this graphic referring to 12, 13 and 31:
The transfer case wiring harness is part number 12342789.
https://www.eriksmilitarysurplus.com/wihaforhmtr1.html
Sorry for raising a dead post but i am hoping some one can provide an answer for the next guy to search this.
I am finishing up a 4l80e swap on a truck that had a 6.5 and 242 paired to a 3l80. The 242 transfer case wiring harness was there along with having the T/C Lock light mounted but the...
The antenna mounts were part of the demil process on my M998. I was left with a metal plug with a hole drilled in the center for the cable. I found a replacement plug here https://www.ebay.com/itm/4-Pack-1-1-2-Metal-Hole-Plugs-Nickel-Plated-SP-1-5-NK-/282855509314
These were also used for...
Why not just figure out how to hook up the $40 New Zealand timer? No matching temp sensor needed and it gives you total control? Seems the most cost and time effective route?
Ok I’m not wheel sizing expert..... I am trying to figure out what backspacing on the 17x9.5 Black Rhinos for as close to stock. I have searched here and the Facebook and -18 mm offset seems to be the most mentioned but I have also been told +6mm. Since the stock wheel is 9” wide with a 7”...
I have have a 6.5 and 242 and have been looking at both the 4L80e and 700r4 and to do it right, the $$ difference between the two is not that significant.