Recent content by Ronbo

PS I should have also said , drop the pan and see what it looks like . If its got black stuff or metal shavings that will answer the question . also if the seal is bad B?T the trans and transfer case the fluid from the trans and go into the transfer case and make the trans fluid low..

Direct/ forward clutch Pack.. Pull the trans , stand it up on end . Pull the pump and remove the clutch packs . just watch how it comes out . replace the seals and clutches .( you'll see if any are burnt) should hold you for a while . Its really not hard to do , easier than you think..

Thanks for everything.. I got my gifts today and all looks great. Gentlemen I thank you for your prayers but more are needed a lot more... Thanks You

Thanks again for everything , I cant get out the house but a friend will go to the PO tomorrow and retrieve my blessings. I wont go into anymore details about all the stuff this year but if you could only imagine what something like this does to boost moral !!! Its was like a giant gasp of...

OMG dudes !!!!!!!!!!!! I am totally just blown away !! I never expected anything like this..!!! I am totally speechless .. I hope to God this is a new starting point.. I try and think positive every second and every day is a new beginning ,, When I get to church next week I will ask all to...

yes the front brace was on.. and you are correct I will change the flywheel.

Thanks , ?? How far in does the starter gear engage on the flywheel? it did damage 4-5 teeth but just like a 1/16 or so / If the starter gear engages all the way on the flywheel teeth, I should be fine , but I dont want to take any chances and ruin a new starter. another question My old...

The prayers and friendship really do mean a lot... Thanks

MT Eagle area.

Thanks Guys.. I pulled the starter yesterday. All the blts were good and all was tight. But whatever is happening the starter is not engaging properly with the flywheel . Its actually messed up about 5 teeth on the flywheel.. I took a file and fixed them pretty good. Its like a 1/16 f an...

Thanks , That really means a lot .. You guys are Great !! I went for a quick 2 mile run and it helps with the stress. My head's up, and I feel like Rocky " yo Tommy lets have 1 more round " Thanks Wart..

The past year or so has really been bad, and I try and keep a positive attitude but this week ( today ) got me.. I was working abroad and came home, I had just lost my mom , I got hurt working in the sandpit , lost some vision, lost my job, never received workers comp. Fighting them , lost my...

Well I replaced the modulator with another( 2 ) and vacuum checked it and all is good . I replaced the vacuum hoses and set the VRV in every position possible and it does shift all 3 gears but sure is soft and the position of the VRV doesnt change the shift at all. So is the VRV supposed...

Hey Dog :) I put it on But I cant get it to pull 20" of Vac. so I tightened the vrv down ( just centering it ) and the trans will shift but real soft. but it does go in all gears . Maybe I can adjust it and have it shift a little later and harder.. I really need it running so I can get...

I just got the new vrv and applied 20 " and it wont hold any vacuum .. 0. is it bad or am I missing something