Recent content by Shotgun

Thanks for all the help, Greg

Thanks for the link and help. So besides connecting the air lines together, it is only two line 24 volt positive /negative to a switch and then to the battery from what I can tell from the diagrams? Greg

Were do I find one those at? Does the manual over ride mean I could have the fan turn all the time if the thermal solenoid unit went out? Having a spare new would be nice. I had the unit go out while I was 6 wheeling in the boonies and the truck was over heating, (Of course it is middle of...

Thanks for the web link, that was very helpful. I will give it a try and rebuild it. Shotgun

I just replaced my Engine Fan Clutch Air Control Valve with a new one from Erik's (by the way great service again from him), is there a rebuild kit for the old one? I take it, the temp. control piston went out on on it? Don't want to throw it out if it can be rebuilt. Thanks Greg

Thanks for the info: like said I will continue testing the PCB when I get a new meter. Just not sure about replacing the alternator after doing the page 0083 in TM 9-2320-272-23-1 test. Like I said, seems to be charging fine, belt tension is good. I will post more either tonight or tomorrow...

Version:1.0 StartHTML:0000000105 EndHTML:0000009098 StartFragment:0000002353 EndFragment:0000009062Well here is what transpired for today and of course as usual it was a CF. Got my cd out I bought for the TM’s and put in a PC a friend have given me recently. Booted up fine as I am looking for...

So Mr. rooster from the diagram you kindly sent, I just disconnect the 5 and 6 wires and check the continuity with a multi meter? I don't have to take the neutral safety switch off to test it? If it is bad where do you get one to replace it? Do the part houses on the site have them? Thanks for...

Hopefully someone can give me some ideals what is not working on my A2. First some up front information, I really haven’t been on the boards at all for some time now. I dropped dead last Oct. 20 at work and was really sick before that for probably 10 months. Thought my asthma was kicking my...

I have one of these kits new in the box. Can some one tell me where to get the wire for the other side of the yellow connectors to keep it all the same when wiring up the auxiliary lights and such to the switches? Thanks shotgun

That’s the same connector that was lose on mine when I brought her home. That gave me 2 weeks of headache, until I started ripping out all the fuel lines and then found it was lose. Oh well now I don’t have to worry about rotten fuel lines now. Shotgun

As Silverstate55 stated, the return fuel line going into the tank on mine truck as well was a rubber hose that was falling apart and was half gone. I replace all the of 90-degree fitting’s going into the tank with new ones, as well as the new pick up tube and return tube. The one thing I am...

What Suprman said is good advise, after my 2300 mile trip bringing my truck home, I let her set for a week and could not get her to start with priming and anything else I could think of. After about 2 ½ weeks of screwing around of not getting anywhere useful and killing my batteries. Now I had...

Thanks Shadowdd, finally able to get on today, will try your suggestion, when I get home Fri. Got on tonight at work yay got some catching up to do during my breaks. See how many days I can get on again. Thanks for the support, Shotgun

Thanks Goldeneagle for the link, I am having trouble with the site again, lost it the other day at work and now at home. Keep getting a 503 error code on the screen, this has been going on for about 8 months now. It will go down for months then I can get on the site for a week or two then down...