Recent content by smokem joe

Kubota with forks works well up to 803A. Any more weight than that and my hydraulics stall out

I had an 803 that had a vibration in it. It was just as bad as an 802 while running. Guyfang suggested pulling the stator, unbolting the rotor from the flywheel, and turning the rotor halfway around before reinstalling the bolts. This did not completely fix the problem, but it did bring it...

Also, not real sure that the Ferco is PVC. I pulled the cover and inspected it the other night. It looks and feels like solid rubber even now after having it installed for several years now. I know some of the box store stuff may be different though. Silicone is not supposed to be used on...

Ok-just looked like the same thing. I can report after having the one I used on a trailer mounted genset for several years now that there is no issues with it. I've taken it all over to job sites for portable power and no leaks or breakdown in material. It is a cheap fix that needs no...

Same fitting, only yours didn't come with the steel band.

I don't think I paid any more than $40 for any of mine

message sent.

I have the 5 ton tm but not the 3. I will take you up on that! What's the easiest way? Provide my email?

NSN: 4120-01-581-1276 3 ton unit I'm looking for the TM in my files.

I'm looking to run the heater portion on single phase 240v coming in off the road. Not wanting to run the genset for heat

Take a chance and just go 240v single phase to 240v 3 phase?

I can get a phase convertor local here pretty cheap that will 240v single to 208v wye. Just wanted to make sure it would work. I may also look at losing some of the heating elements and hooking up to 240v single phase, but I'd probably have to change the fan motor to make that work.

Going to attempt to run 3 ton military AC/heat unit for some heat in the shop. The nameplates on those aren't really helpful in that respect. I think the heating elements would have no issue. Not sure about the motor for the fan and any controls though.

I am sure this information is out there someplace. I haven't found it yet though. Does anyone know for sure when on 208V are they producing on wye or delta? Reason I am asking is I have several of the 3 ton heat/ac units and am thinking about using a phase convertor to power one for supplemental...