Recent content by Tato

Hi, my smart box I bought it used but tested, in Italy it is not easy to find them and buying them from the US is very expensive. I tried to contact the seller and he told me that according to him it is the regulator that burns the smart boxes. I don't know if this is possible. When the first...

Ciao, la mia smart box l'ho comprata usata ma provata, in Italia non è facile trovarle e comprarle dagli USA è molto costoso. Ho provato a contattare il venditore e mi ha detto che secondo lui è il regolatore che brucia le smart box. Non so se è possibile. Quando si è rotta la prima scatola, ho...

hi guys, after not even 100 miles I am here again, my humvee (m1045a2) fried the second control box too. I am attaching pictures. I would like to know if any of you make manual control boxes (reasonably price) and if you are willing to ship one to me in italy. keeps frying mosfets, what could be...

Found it! TDM connector loose, thank you!

Hi guys, I finally managed to recover a working smart box, I mounted it and the humvee started up, but the cooling fan now stays on all the time, will I have to change the temperature sensor? The never ending story....😓🥲

Hi guys, does anyone know what this part is called or what it is for? Maybe even the part number.... Thanks

My manifolds are like this, the gaskets were on the original engine and I put them back on. Inviato dal mio CPH2005 utilizzando Tapatalk

New gaskets on both manifolds and coupling flanges. 6.5 n.a. Inviato dal mio CPH2005 utilizzando Tapatalk

Since I fitted this engine I have done about 800 km, at about 100 km/h, a couple of times I pulled a little more after the noise to see if it changed Inviato dal mio CPH2005 utilizzando Tapatalk

I'll try but the Allen bolts are all tightened, as are the flange bolts, the only thing missing is to check the passenger side because the bulkhead is annoying. I'll try dismantling the starter motor and check there too. Traduci dove e quando vuoi Inviato dal mio CPH2005 utilizzando Tapatalk

OK understood, but I already checked the alternator bracket on the exhaust bolt. Thanks anyway for the tip Inviato dal mio CPH2005 utilizzando Tapatalk

I'm sorry, but I didn't quite understand which part it is Inviato dal mio CPH2005 utilizzando Tapatalk

Oil and filter replaced after 500km and tappet additive added. Sometimes it seems to tick between the engine and gearbox, sometimes on the passenger side. It still works but is really annoying. If it idles for an hour there is no ticking, as soon as you go a few metres it starts again, one...

Hi guys! Here I am again, not even a thousand kilometres after the new GEP engine, new problem. A ticking noise that occurs from time to time, especially as soon as I stop after a lap, then after a minute at idle it disappears. The engine runs very well, pulls hard, doesn't smoke and always...

Hi guys, today I found the interior data plate of my m1045a2, but it is different from the one on the driver's side. Maybe it's still the old one serial number? Does anyone have a blank data plate?