• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Recent content by tomelroy

  1. tomelroy

    How to bypass PCB? I am aware some HMMWV owners have done it.

    Would love to see the video!
  2. tomelroy

    Items you normally check 1st and need to repair and or replace?

    I always check for Slack in the throttle cable, then adjust to remove any if needed
  3. tomelroy

    Are the dip stick accurate on ECV trucks ?

    Confirming that the dip stick is measuring the correct depth of fluid in the pan should be ruled out. If everything else is done right, maybe somebody swapped out the dip stick from something else or ??? 99+ percent it was correct off the line. Only way to rule this out is droop the pan and...
  4. tomelroy

    Are the dip stick accurate on ECV trucks ?

    https://www.bowlertransmissions.com/dipstick-calibration/
  5. tomelroy

    Are the dip stick accurate on ECV trucks ?

    I would drop the pan again and calibrate the dip stick. Can’t see why this would only be relevant to ecv
  6. tomelroy

    No-start issue : Where to begin

    i would start by load testing each battery...proceed from there
  7. tomelroy

    Are the dip stick accurate on ECV trucks ?

    did you check the trans level with the engine running or engine stopped?
  8. tomelroy

    Which states are not HMMWV friendly?

    Just curious how many states are not allowing these on the road as of 1/2023 and which are...
  9. tomelroy

    REV truck?

    looks like GP added another running m1165a1 with doors in GA. I had the listing up and it said opening bid was 35,100.00, then i refreshed the window and it said 4,000.00. Wonder what that glitch was all about? Should be fun to see what it goes for....those trucks can go for crazy money!
  10. tomelroy

    Who can guess the winning BID?

    x doors, hard top, 10K+ for sure, but if you get it i will trade you out for that speedometer...its the wrong one for that rig. I have the one you will need and i need that one! I will cover the shipping both ways...Good luck!
  11. tomelroy

    Are all good trucks gone?

    seems like a bargain compared to the one that went for 65K last year!, but that particular model and configuration has seen prices of 65K, 50K, 48K and 45K in the last year and some people just like paying more, going thru the EUC process, and waiting for 8+ months for sf97.....when they could...
  12. tomelroy

    Sf97 latest time frame

    Move to Morgan
  13. tomelroy

    This is why you check your halfshaft bolts.

    remove the dislocated shaft, put it in HL or LL and drive it! Trans is probably fine.
  14. tomelroy

    Cheap EBAY Mirrors for your humvee REVIEW..

    am general is and was out of stock,, mac only had one left side (needed 2 sets)....and I had no clue they were reproductions untiI I opened the box, didnt even know reproductions were a thing, but seller has accepted the return. So, I just purchased some OEMS on ebay!
  15. tomelroy

    Cheap EBAY Mirrors for your humvee REVIEW..

    I recently purchased some mirrors for my Hmmwv. Found a new set on ebay for 225.00 plus shipping. Ebay pics looked good, but when i received it I realized these are a Cheap reproduction.. The mirrors themselves looked ok, but the brackets are a joke, and have been painted with cheap paint...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks