Recent content by trucker 1954

No start pruple / white You guys hit on the head 16 gauge link to 12 ga red in cab going to Napa the PN is 785832 link and conector is 784274 it showed power with test light put a load on link and what was left is now gone. Thanks for your Help Warthod and Doghead

No start Yes it was running and pluged into the slot nest to the 10 amp fuse above the 30 amp on far right side of fuse box . truck shut down no power on the on or start no volt meter showing anything Im at work will check pink wire tonight with Key on

1986 m1028a1 cotract Body

unpluged as soon as truck shut off would not restart all fuses good , looking if it has a saftey switch between the yellow from ignision switch and purple and white wire to start relay to night I have a miltimeter and a snap on test light All power leds in to cab power up with a test light...

Pluged a 12 volt fan into Fuse box power slot up from the bottom flasher. Truck was running ,fan ran and truck shut off .checked all fuses good / Did relay Mod nothing / Changed ignision switch nothing / All fuse links power up in engine bay. Truck is a bone stock 1028 1986 19,000 miles...

My sons a bad shot

Can any one help me with a part number for a Coolant temperature control(glow plug switch, 1986 6.2 has black and yellow wires with a single pole plug thanks great site

Please show me the correct way to wire a ST85 relay thanks

No way 20 bucks you'll get crap

Sorry it is a m1031 my mistake i have the same one with the dodge box from tx

Will look like this with some work, i thought the 31 has dually wheels

No lift just air bags in front firestone kit for 1 ton gmc for a 2 in soft lift 35 12.50 16.5 mud bfg s light trimming and good to go putting 37 inch tires on soon

More pic s to follow were getting another 14 inchs of snow tuesday

Done at last almost a year to get ecu and reman and put on the road but very happy for the support from every one on this site thank to all