• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Recent content by wisconsinz

  1. wisconsinz

    Wiring, need a little help

    Thank you kindly!
  2. wisconsinz

    Wiring, need a little help

    Basically just trying to figure out the difference between these two alts before I rebuilt them. Thanks.
  3. wisconsinz

    Wiring, need a little help

    Finally got the alts tested and I'm about to rebuild. I first rebuilt them in 2013, but it seems they're shot. Both stock alts are identical (have the isolated ground post), other than the capacitor on the passenger side being on the outside. My questions are: 1) why on the outside of only...
  4. wisconsinz

    Leaking axle?

    Hey guys, Searched a few threads regarding axle seals/leaks but couldn't find any photos that helped me diagnose this... For a while now the right front tire rim has been collecting grease/soot. I've heard it could be soot from brake dust but the calipers were changed a couple years ago and...
  5. wisconsinz

    Is this an axle seal leak?

    Hey guys, Searched a few threads regarding axle seals/leaks but couldn't find any photos that helped me diagnose this... For a while now the right front tire rim has been collecting grease. I've heard it could be soot from brake dust but the calipers were changed a couple years ago. As you...
  6. wisconsinz

    Flexplate rubs original starter

    Starter was around $80 from O'Reilly's. The flexplate can only be put on one way right? The raised rectangular patch (whatever its called) on the plate should be facing the rear right?
  7. wisconsinz

    Flexplate rubs original starter

    No machining, same housing. Correct flexplate. Yes, they shimmed, but shimming wont move the starter forward.
  8. wisconsinz

    Flexplate rubs original starter

    Hey guys, Had my 27mt direct drive starter rebuilt because I must have improperly installed a new 28mt gear reduction and it chewed up the flexplate while the tranny mechanics were doing some adjustments. Now, for the life of them, they can't seem to install the 27mt with a new flexplate...
  9. wisconsinz

    Grinding noise when trying to start M1009

    So this nasty grinding thing JUST happened to me when I tried to start it. Only thing I had done since I last parked was an LMC headlight wiring kit. I looked under the truck and found that a cracked starter bolt had fallen out (i'm assuming after this failed starting attempt). Recently...
  10. wisconsinz

    Possible bad ground, but which? Happens when brake applied.

    My stereo loudly pops my speakers and my gen 2 light flashes when I brake. From what i've read both of these things can be related to a bad earth ground, but I've checked a few obvious spots already. I can't figure out which ground would be associated with applying the brake from looking at...
  11. wisconsinz

    Really dreading what this sound could mean... Any ideas?

    This clip is a better example of the sound... https://youtu.be/70dX6tfikFE
  12. wisconsinz

    Really dreading what this sound could mean... Any ideas?

    https://youtu.be/o0UHTgBGyTY Putting my ear to the oil pan is where it's loudest, or maybe just beyond it, more towards the rear. It stops when I put it into gear sometimes, but usually I can hear it again at random times when I'm driving. I know it leaks oil, and possibly ATF. I haven't had...
  13. wisconsinz

    Temp sensor - replacing

    Nevermindaua
  14. wisconsinz

    Temp sensor - replacing

    So the one they gave me was this: http://www.oreillyauto.com/site/c/detail/BWD0/PT778.oap?year=1984&make=Chevrolet&model=K5%2BBlazer&vi=1050589&ck=Search_pt778_1050589_-1&keyword=pt778 I just compared it to the one I should've gotten...
  15. wisconsinz

    Temp sensor - replacing

    Maybe I got mixed up here... After reading the sticky about the temp sensor, O'Reilly showed a part that looked like this (but it's called a coolant temp sensor)...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks