Search results

As I previously said, the knob on the end does not turn period. Not at all. It does not move in either direction with or without tention on the brake arm. The long piece that is usually attatched to the knob (goes down through the center of the brake arm) and adjusts the tention on the brake arm...

I have the first gen parking brake on a 1097 with no button and the knob on the end does not twist. What are your thoughts...lol...help.

Honestly, the TM manual is a piece of crap. If you've used it a couple hundred times and know your way around it, that's good. But if your new to the whole HMMWV thing, and are not mechanically inclined, then your looking at blank pages. I think when new members ask a question, we should answer...

Like the back end is moving sideways on gravel when I make a sharp turn.

No clicking sound...just a real rough sound when I am making a hard turn.

M1156 Newly acquired - Rear wheels make a noise only when turning like they are in a bind. Checked both hubs and they are fine. Has anyone else experienced this before? Thank you.

Yes sir. I am actually thankful to doghead for his post and I used his link to find the info on an item (although it took me a few hours to figure out how to cross reference the TM info). This isn't my feed and I did not ask for help on it. But the general consensus on this forum and on all...

Way too funny!!!!!!!!!

Thank you! I actually bought 2 matching sets on Ebay this morning. I understand and appreciate the fact that it would be helpful for us to read and learn the TM's, but then it kinda defeats the purpose of forums like this as a majority of the threads involve working on vehicles and are in...

Lol...Everyone wants you to read the TM's when they could just tell you a part number. It's a control thing. I enjoy helping others.

Lol...they had the belt at Eastern Surplus for $49.50 ($54.80 after taxes) and the shipping was $35.00! So $90 for a belt we found at Oreilly's for $19.95!

Yes, compressor is installed. Has the built in reservoir.

So I am a little confused. It seems there's four different belts for m1123's. There's two belts for the pre serial# 180,000 (one non-a/c, and a longer one for one with an a/c), and two for post 180,000 serial number 1123's (one for non-a/c and one for a/c). I just got a 2000 1123 ser#...

Speaking of serial numbers...I have a 2000 M1123 with serial number 188452. What size serpentine belt do I need? Also need an IP pump. The PM info system sucks, so I stopped attempting to identify parts using it.

There are parts for antennas, communication, dash controls, and 100 other things...lol

Can anyone recognize what exactly this is? I bought a load of Humvee parts and this 250 pound box came with it...Not humvee parts... here's a couple pics...On the box it says: MTVR AMK31 Non-Reductable Tractor Metal Kit (514656. It was made in 2015 and sat at SPAWAR Naval Warfare Systems...

Can anyone recognize what exactly this is? I bought a load of Humvee parts and this 250 pound box came with it...Not humvee parts... here's a couple pics...

Just answered my own question: Lol...just pounded a screw driver right through the side of the filter and out the other side and twisted it out....

Was using a tooth wrench to remove an oil filter on one of my humvees (a new purchase) and all the wrench does is poke holes in the filter. I know I can tear the filter apart and get it out that way. Anyone know an easier route? thanx.

Having the same issue. Turned the light on and before I could drive off, both head lights went off. All other lights work, but neither low beam or high beam on the head lights work.