Search results

I wish I was close enough to buy it for me !

That's how I was able to buy one of my 1954 REO trucks. The Oregon forest Service had a Deuce REO for sell. The engine was bad. That was all it said. I bought it sight unseen and went down there with my good buddy to tow it home. When we arrived, I was able to talk with the shop foreman about...

Thank you. Of course with the tensions lately with U.S. and Cananda right now they might just throw me in Jail and lose the key !!!! Of all the times to start a trade war ! Just when I'm going to go and try and bring a truck back to the States ! Just my luck. A day late and a dollar short !

Here's the military shifter shaft seal.

First off, I'm sorry about my last post. I've been sick for the past week and I feel I didn't write a very good post. Brain not working very well. So today I'm feeling much better. Lets hope this post is better. I need to emphasize the importance of aligning the governor to the reverse blocker...

I promised to show you how to align the "reverse blocker" to the "governor" . So here it is. You will need to buy or make up your own tool for this. There is no way to get around it. After installing the four sealing rings, you will install the reverse blocker. You will need to loosen the...

OK, this is really pissing me off now ! I was set to go up and pick-up a truck from Lyle after visiting Dave (plowboy) in Edmonton. If Lyle still has the registration will it still work ? Of course I believe he said it was lost.

Well that truly sucks ! Now I know why Lyle up there at "100 Mile House" was so pissed off last week when I talked with him. So what will happen to people like me who want to get an old truck and bring it down here to the States ? Are they going to be stopping me from bringing it across the...

I search the internet and craiglist all the time trying to find parts for the HydraMatics. One problem I have come across several times is the seller has some part that is NOS still in it's original wrapper or sealed box. The problem is these parts are almost 70 years old. The box or wrapper has...

Well my search for some machine shop to help fabricate the throttle lever shafts has proven futile. Unless I want 1000 units or more, most shops don't even want to talk with me. So that leaves me with using shafts from civilian HydraMatics. The problem there is, they too have a tendency to get...

I also rebuilt the oil pan and installed it today. I use some spray gasket on the fiber washers for the water side of the cooler. Then I put some assembly grease on the cooler where the fiber washers will make contact. Then install the cooler making sure you install the fiber washer, ring and...

I finally installed my new transmission holder. Works great. You can really see the difference between the hold-down bolts. This new holder will take that "303M HydraMatic" all day long !

This diagram was from the 1980's, so nothing really new here. I threw out the modern diagrams from "New Flyer" sorry. Maybe I might find another cache somewhere else.

So I guess I'll aim for June then. Thats just a very simple normal valve body. On later car HydraMatics they got a little bit more complicated. Of course not nearly as complicated as say an Allison 1000 series or worse yet a Chrysler 68RFE , or an GM 6L90E or any new transmission out there. The...

That's great news ! Also I found an air diagram for a 40ft bus I'll post for you. I was cleaning out an old cabinet that had a few of my old manuals. One had an air diagram for the 40ft Gillig bus. That should show you what a normal medium size vehicle air system looks like. Sorry about the...

Hey Dave (Plowboy) . When does the snow usually leave your area ? In other words, when will it be safe to come up there ? I'm thinking late spring early summer. Does that sound about right ?

That lever, (which gets hit and bent all the time) gets a push from the rod attached to the Carburetor . That tells the valve body how much engine power is being asked for. Full throttle tells the transmission to hold back on shifting or to downshift (depending on governor pressure) to keep the...

Some might be wondering why I've been so slow in building this HydraMatic. One reason is parts availability. I've had to cannibalize several transmissions just to get enough "good" parts to finish this transmission. Another reason is I've had to have several parts "modified" or outright built...

Here's the number you will need.

Today I installed the reduction housing. That new crane I built made installing this housing a breeze ! Without it, I would have had to use a "cherry picker" or had another person help me. That housing is heavy ! My hand is healing up after my thumb injection last Monday. That shot hurt ! Make...