Search results

http://www.kc9aop.net/HAM/antenna_facts.htm a fun page with great info !

People have stated this antenna works in the ham band , well not the whole band . I have done testing and found that it was not being all that it could be. I have installed then checked the SWR on the antenna ( Location of install , Pass Rear of Truck ). What I did find it was ok at 147.200 1.5...

how would you rise this up ? tilt over ? I like the telescopic trick as it has a smaller footprint

any one thought of how to build a say 45 + FT mast. I have seen pipe (PVC SCH 80 ) used but the plans are kinda crumby . using duct tape to make a gasket on each 10FT pipe in side each other ? i'm open to refine the idea 73

http://www.steelsoldiers.com/showthread.php?53674-Military-antennas-for-amature-use I added 2 inches of wire to make mine very good on 2m

has anyone ever added onto the rear of the m109a3 box to make a full 16 FT? Or even building a slide out for the side ?

Parade for Memorial Day Date May 27 . Location Burton Michigan . Line UP TIME 2:00 PM 14:00Hrs Start Time 3PM . CONTACT: digitaldust , PM for attendance we will be lining up before hand and doing a convoy into the parade location for more info PM digitaldust That is all ,

very nice , did you get any award ?

ya really ! , It should mandatory to update what is going on over at the trucks. And take videos and pics. We need to know !

well , what if you use new atf transmission , say 2 quarts . For Ip lube its a 40 Year old pump. and it makes my fuel red officer ..

its basically nut-certs that your working with , try having person B under the truck holding up vice grips and try to grab a hold of the back of the nut. then clean the threads with a tap and die kit . thats my 2¢ , oh WELCOME to the MV world! and have a search about this in the radio area .

nope... go fish.

oh boy, well I hope it is nothing too hard to deal with. Please let us have pics , and repair info . And how the what happened.

What does that data plate on the dash say ? That is the only thing that looks military.

So what is the out come of this ? gem did you fix the truck from this post ? I'm working on the same area of shooting. It would be nice to know how this went.

is the booster pump hard to change in the truck ? is there any difference from IP on a turbo and a IP from a non turbo ?

Thanks for the photos. I hope I found my no start trouble !

can someone post photos of there HH fix or swap, I think I'm down to that. thanks

well the shut off seems ok , The Truck starts great with 2 - 3 very little shots of ether and idles great cuz i turned up the idle. just to stay running . when the truck is started it runs great until its turned off.

I hope to check that pressure today. fuel shutoff is working.