Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Wow! I really appreciate all the assistance. When I get a chance, I believe I will start with checking the vacuum on the fuel tank. Unfortunately, life happens, and I have not had time to work on it. I will eventually get to it. You fellas have provided enough information to help me to trace...
I appreciate the video (I watched it). My situation is that the vehicle runs fine for about 15 miles/20 minutes, and then it shuts itself off. I can wait a little time and it will start up and run again. The longer I let it sit, the longer it will run, until it shuts off. I believe it has...
I have a 2004 M1079, that I purchased some time back. While driving the vehicle it will eventually stop running/shut off. I drive it, maybe 15 miles, then it dies. I am assuming it has something to do with the temperature (coolant). I then have to wait 15-20 minutes and it will start right up...
Way cool. It worked! Thanks. The air dryer had a triangle, three bolt, mounting plate, which held the 90 degree elbow to the assembly. After removal, there was a course, threaded bolt that appeared to push a rubber diaprahm. I removed the bolt (not much more I could do, at this point), and...
Help! Once again, I am not a savvy computer guy. I looked through the forums (so much information), to see if I could find any threads for air problems/trouble-shooting. My LMTV starts, idles; however, my tires and brakes are not airing up. I usually start my LMTV monthly, and I noticed this...
I must admit, I am not a Forum savvy kinda guy. I did not have much luck finding what I was looking for. I have a 2004 S & S M1079 (LMTV) that runs hot and shuts itself down. I replaced the coolant and when I did there were small pieces of red plastic in the coolant. About 6 pieces of all...
What is the purpose of the (looks like a grounding wire with a diode) between the positive and the negative bus bars located on the firewall in the engine compartment. Mine is broke in two; but 85 Blazer still runs. Is it for some kind of noise suppression? Anyway, I guess I need to replace it...
I am working on my 1985 Blazer and I searched a long time to find what I was looking for. I ended up with USA1Industries. I ordered from LMC and it was not what I wanted (the rear seat cover did not cover the entire seat). USA1Industries is now making the seat covers, they call them mahogany...