Search results

:popcorn: looks good

there is another tm saying to run a new vent line for t-case. you need to separate the transmission vent line form the t-case vent line

I talked to a hmmwv mechanic and he point out that the vent line for the hubs had to be separated from the transfer case and the transmission , there is a tm for this. if you drive fast it can pull the fluid up into transmission then to the air cleaner. check your hubs. I ran a new line to...

Here is the one I built but now I need to sell http://www.steelsoldiers.com/showthread.php?153909-M35A3-crew-cab

I upgraded mine and use the 12v output to charge a 12v battery to lift my snowplow with my winch and run accessory's

I bought the tray table new for $15 but had to make extensions so it would bolt up to the dash. Mounted to the wood box I have two 12v outlets, controls for golight, tiny tach, and the radio / speakers. The top section with the speakers lifts off and inside is a 12v fuse block. I plan on adding...

I have my fm radio hooked up to the military antenna and it works good.

I am looking for a tailgate in nice shape for a m35A2

I will be there on Saturday and can bring these parts if anyone is interested Seats $200 each, hmmwv battery hold down, air cleaner cover, rear half door blanks front brush guard, original seats/ pads, military tow bar with feet/ pins $300 New 24 volt impact gun that fits on slave port $300...

Hi Todd, I have a fuse panel that i'm removing from a shelter I just picked up, and I also have equipment racks Let me know if your interested Here is some pics

Does anyone know what the timken part #s are for the inner and outer wheel bearing? I was told one of the #'s is 3490 and that's the inner one. I searched the tm's but could not find the info, if you have the info and what tm its in please let me know. Thanks in advance

Relay, cooling fan, time delay. NSN: 5945-01-193-7175, PN:L 12338603. http://www.easternsurplus.net/HMMWV.html

I would think fan should not spin until solenoid actives it but not sure what that temp would be. My solenoid is brand new I can check it for a part number and maybe it will say what temp its set for

My 6.2 runs about 200, I just flushed out the cooling system, it needed it, it only has 13,000 miles on it. There is something that controls the fan near the washer fluid tank, its a little black box I just changed all the fluids and filters on my Hmmwv

I got mine in 20 days from sending them euc, they didn't let me know I caught it by chance by looking at euc status on their web site sent it in 3/4 they sent it to battle creek on the 3/10 it was approved 3/24 and I just noticed it today They told me today that the iron clad assurance starts on...

Here is all of them, call this guy and he can print them out and send them to you Greg Knoyle (406)543-8816 dataplates.net - 1963 South 14th Suite A - Missoula MT 59801 dataplates.net

:D looks good

what is inside your tires, the bead locks from the m35a3 rims or runflats that came inside the tire?

yes air can leak backwards thru ctis if the valve on that tire is bad, put cap back on an air it up, if it still leaks then it maybe the runflats like i said in post #4

are you using the runflats that came in the 395s, I had the same problem, the run flat is 10" were as the bead lock in the 14.5s are 11", so I changed back to the rims that came with the 395s. the ctis will not put enough air in them, they call for about 90 psi, I run about 70 psi and removed...