Search results

Had the starter off, it's the 24V 27MT Direct Drive, OEM one. The bracket was not connected when I took it off, but bracket itself looks brand new as well. Lot of good it does just hanging there huh? I re-installed it and the bracket is now on. Starter and flywheel looked great. Now I'm...

I'll look into the priming, electric pump, and flex plate. If the fuel system wasn't primed and you tried to crank it, would it just crank and crank with no result, or what would happen?

Just got an M1009 that has a faulty fuel gauge/needle. I noticed the needle fluctuating about a quarter gallon occasionally. For the last few days it has been stuck at a quarter tank. I put an extra 5 gallon jug of fuel in the back of the truck in-case I rant out, and of course, on a highway...

Alright, so hopefully no-one ever has the problem where they've overfilled their tranny and the pan don't have a drain bolt, but if that ever does happen, I was able to suck just 1 quart out of the pan through the dipstick tube. I explained in the beginning of this thread that I had overfilled...

No drain plug that I know of lol

Dropped the pan and changed the tranny filter lastnight. TM says capacity is between 4-9 quarts. Added 4 quarts off the get, shifted gears, let it sit a few minutes, and nothing registered on dipper. Repeated process with 5 qts and 6 qts and then finally it appeared to be about a quart low...

Mine has the same steering problems and then some. After any turn on any road, the steering wheel will stay 90 degrees off in the direction that I had last turned until I have driven quite a few blocks. There's also quite a bit of steering wheel play. On the topic of steering, anyone know the...