• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. CNC2013

    Essential Tool Kit for a Recovery

    I have packed a flashlight, extra batteries, 1" drive breaker bar 10" ext, 38mm-1.5"-1.25 sockets, belts, blue tooth speaker, muffs, clothes, gloves, high temp sealant, Duct Tape, 2" ratchet strap, 10' 3/8 chain, HD Master Locks, screwdrivers, 3lb sledge, channel locks, side cutters, hose...
  2. CNC2013

    Essential Tool Kit for a Recovery

    Excellent list there Choppers and yes unfortunately I cannot take alot of that on the plane. The 38mm socket I assume is for the lug nuts right? Was going to buy and pack up some new belts but all the Napa P/N's I have found on this site don't seem to come up in the Napa Website. Maybe I just...
  3. CNC2013

    Essential Tool Kit for a Recovery

    The truck is from a private seller and does not sit in a field. I believe it was purchased and driven from Indiana to TX last December and in March it was driven from TX to Arkansas and back. No problems during those drives. I believe they have the service records.
  4. CNC2013

    Essential Tool Kit for a Recovery

    Thank you Choppers!
  5. CNC2013

    11.00x20 G177 Tires and wheels Value?

    Thanks guys, I really appreciate your input.
  6. CNC2013

    Essential Tool Kit for a Recovery

    Hey Choppers, thank you! Here is the info: 1989 AMG M923, Flying into Fort Worth, TX and driving to Norman, Ok and then home to Albuquerque, NM. I35 North to Norman and then up to I40 and west to albuquerque, NM. I believe the whole trip is going to be around 700-800 miles. Roads are mixed, flat...
  7. CNC2013

    11.00x20 G177 Tires and wheels Value?

    I typed A2 by mistake, they are on an A1. Was using my phone at the time...between fat fingers and what Apple thinks you should be saying it's a pain to deal with.
  8. CNC2013

    Essential Tool Kit for a Recovery

    Hi guys, i searched all over this site and could not find a thread that covered the essential tools that should be brought when recovering(Purchased and drive home) a vehicle. I am hoping that maybe with input from said experts we can make this a sticky for new buyers to go by. I myself am a...
  9. CNC2013

    M923A2 Measurement?

    98g - I know my truck is an A1 but I am asking the guys with A2's because in the short time I have been reading all through this website...not a lot of guys with A0/A1 trucks on 14's and 16's. I have mostly seen A2's so my chances are greater on getting some form of an answer to go by. Jbulach...
  10. CNC2013

    M923A2 Measurement?

    Hello, I am looking for another M923A2 owner that has their truck sitting on the big 53" tires. I have researched and cannot find the measurement from the ground up to the top of the frame at the rear of the truck. If someone could measure that it would really help me out with what I am planning...
  11. CNC2013

    11.00x20 G177 Tires and wheels Value?

    Thank you 98G, much appreciated.
  12. CNC2013

    11.00x20 G177 Tires and wheels Value?

    Thank you for the response Jbulach. I honestly just had no idea what they could be worth.
  13. CNC2013

    11.00x20 G177 Tires and wheels Value?

    Hi guys, need some input from you. I have heard there is a market for these tires and wheels but I am wondering what the value of these are as I am looking to trade these in for some credit towards my larger tires and wheels I will be buying. The tread is between 50-60% tires on all 10 and are...
  14. CNC2013

    16.00 on M929A2, pros and cons

    tobyS - Sorry for hijacking your thread....I honestly didn't think it was going to carry on this far but hopefully you are getting some good advice as well from these experienced guys.
  15. CNC2013

    16.00 on M929A2, pros and cons

    I agree and there are a number of trucks out here running several differ tire sizes so what you are saying makes sense.. small tire big truck, might as well shine it and go cruise the mall.. ha ha ha ha Yes hearing protection is a must, I have seen numerous videos and all said the same thing...
  16. CNC2013

    16.00 on M929A2, pros and cons

    Hi guys, thank you for all the great suggestions. I am getting this at a great price and yes I have been considering the height of the where the hitch would be with the truck on 53’s as compared to where my pin box is at. Currently my pin box is at 53” so it might be too high on 53’s. I’ve got...
  17. CNC2013

    16.00 on M929A2, pros and cons

    tobyS, yes sir very different needs. I'm a newbie to this but have been enthused for over a couple of years now on these trucks and the purpose down at our lake. I've been doing my research and searching for a good used truck for this. Honestly I'm sick of fighting for a descent camp spot on the...
  18. CNC2013

    16.00 on M929A2, pros and cons

    Thank you 98G, I see you are familiar with this area :-)
  19. CNC2013

    16.00 on M929A2, pros and cons

    It's an 1989 with a cummins non turbo and allison 5spd. I really need to go a larger tire, have seen alot of the 9 series truck running the 53" tires but didn't really consider any "Cons" over all the "Pro's" to having them in the deep sugar sand. I've seen these trucks with the duals 11" have a...
  20. CNC2013

    16.00 on M929A2, pros and cons

    Here you go, is A2 wrong?
Top