Search results

I only took one cap off at a time. The knock sounded low on the engine. It was a single knock. There was a bunch of real fine powder stuck on the magnetic drain plug. And i found one piece that was about 1/8x1/8, the guy that drained the oil said he found a couple of pieces that were around...

I pulled all of the crankshaft caps today they all looked good. Any ideas on what to check next? I'm going to talk to the mechanic again tomorrow. Would a bad bearing in the air compressor cause the knock and mettle in the oil pan?

Was your knock really load like a rod bearing was out? My 813 was knocking really loud, I drained the oil and there were chuncks and flakes in the oil. I pulled the pan and all of the rod caps they all looked good. I havent rotated the cranck to see the bottom of the pistons I will do that...

Here's one of mine.

813 pto model What is the make and model for the pto?

Wanted photo of inside of adapter Davep is there a seal or bearing in the adapter or is open clear through?

PLS Wheels I think I have 6 or 7 of those wheels. I thought they were for the five ton trucks, when I bought them.

steelsoldier do you have a part number for the adapter? The adapter used on the M939/A1/A2 trucks can be purchased brand new at Onidi Engineering for $199/piece. Onodi Tool & Engineering Company :: Mevlindale, MI I am having a machine shop make one using the military specs and pieces of my...

Did anyone win any of these? I was going to bid on them but was away.

Some of them use the 21" wheel Iv seen them with 24R21s

I pull two grain wagons to the coop that weigh 50,820 loaded with 907.50 bushels of corn and 10,280 empty. One wagon has brakes. The deuce with its three axles starts and stops the load better than my John Deere 4020 which weighs about the same as the deuce

Anybody have the specs on these and where to get the adapter. Thank you

cab reinforcement I would like one please.

Hello are these 110v or 24?

:( Yes I just got a m35 from Ft Riley had a trucker pick it up with a Ford 350 and 40ft flatbed with ramps I thought they would use a chain on the front of the M35 and drive along the trailer to pull it up on or push it up on from the rear. When he got here I didnt see any scratches on the rear...