Search results

I towed my S280 on an M720 from Charlotte N.C.to woods hole Massachusetts and found that once I made an adjustment on the toe-in on the front tie rods it towed perfectly.I lost a front wheel near Roanoke because of my bad preflight inspection and it still towed fine even with a wheel gone...

Well Rusty I am impressed . How much for one?

Well the Redarc controller is pricey but my first attempt involved installing a voltage converter and relay to only turn on when trailer was connected. The wiring circuit breakers and hardware and time required to install was extremely expensive and technical and wasn't totally reliable so when...

Hey Mike Harry here. I used a redarc 24-12v brake controller and Multi voltage LEDs in trailer so I could tow my econoline 6 ton trailer with my 1028,1008, or 1971 M35a2. works pretty good with no big modification hassle. I put the nato trailer plug on the trailer.

Not too long ago I bought a handle for the M116 trailer leg from bobr2004. He might have another one. Good luck Harry

I agree. Cherry rivets are a superior structural rivet if selected properly and installed correctly. Removing isn't terrible if you use a pin punch and a small ball peen and unseat the anvil pin first.On cherry locks you have to pop out the very hard lock ring with a very small screwdriver or...

Hey Augi Harry here. I was on the after 20 list last time . will I still remain in the order when the time comes.?

Hey Augi Great product.I would like to get on the list for a vic 1 one on batch two if you do more. Thanks Harry (ixpacman)

I'd take my chances with the halftrack if it really came down to it. Thank you

Just purchased a five gallon can of mil spec dot 5 from Iris industries in NJ for $153.74 shipped, to mass.Nice Lady .For those who are dot 5 believers

Get Plate.attach plate.make sure lights work(adapter- lights will be dim but they will work)drive politely.smile (a lot).Have done it three times from new jersey fort drum and pennsylvania . Not recommending it but I had no choice except to exceed trailer value in shipping costs.

I own Both .A 1966 Unimog 404 TLF converted into road service vehicle and a M35a2 dump conversion that is used commercially. The M35 is easier to work on and parts are more available but when I need the Unimog ,I need the Unimog.I think it just depends on what you are going to do with it.You can...

I still don't know why my key sheeted and allowed the balancer to spin but for what the key was worth I replaced it with new one on the replacement engine. Probably would hurt but doubt it is a huge issue. Destroying a perfectly good engine that I took good care of hurt my feelings. Harry

What happened to the classifieds?

Without trailer you can drive legally but brakes would be helpful.

If you pay attention to the real history of Chinese western relations one will realize(only if you pay attention) that the chinese were at one time almost a thousand years ahead of western technology and managed to deplete the europeans of every bit of gold and silver that they possessed until...

I had the same problem when I had blown my 6.2 in my 1008Replaced motor in a hurry and had a corroded line from lift pump to fuel filter. Also had a few injector line leaks at fitting on IP pump.After trying everything possible to tighten fittings with assorted line wrenchs crows feet and...

I just put a flapper on my 71 m35a2 and it had a hole through the counterweight and bracket that you can put a bolt or other device to lock the flapper closed.It is walker part # 35619. I haven't had time to see if it will keep rain out but it seems like if you had a similar part you could just...