Search results

I wouldent bet on them getting the seals at least thats the way it is around me. I just got done doing mine no problem at all simple job, just make sure you get the wiper to along with the inner outer seals. Napa had bearings in stock expensive but they had them, I didnt plan on bearings but had...

Water pump PN # AR-04284 WITH PULLY / AR-04283 W/O PULLY. These are cummins # s call Cummins Mid-Atlantic I think the warehouse is located in Charlotte, NC they will mail it to you. They are very exellent to work with. Mark

Hi CanadaDeuce I took some measurements for ya > width of baseplate 13 inches, length of baseplate 7 feet 10 inches, height to top of tire 43 inches. My spare tire is a 11.00-20 T-Hawk 373. Hope this helps you out. Mark :-D

Groundog thankyou for the info where did you get your seals from ? ty Mark

Hi all hope every one is well been some time since I have been on. Does anybody have parts # s for the real axle seals inner and outer other than NSN # ? to order aftermarket seals or is Old Iron my best shot they seem to be the cheapest NSN parts so far any suggestions cause my tractor is miss...

Gear oil I use Napa GL/1 in the diffs it is yellow metal safe and fairly reasonable price. As far as motor oil shell rotella t 15/40 in mine. I have not had to add any power st. oil but atf will work fine. Brakes a quick way that worked fine for me on my last recovery was fill the res. with...

Thankyou for the valuable information gents I will have to substitue the actual pin with a soft aluminum one as I have not found any pins so far. Seeing my truck is a worker I need the wich to work. ThankYou again Mark

Hi all does anyone know where to get shear pins for the 5 ton 809 series trucks front winch ? I need to order some and some info I have found seems to be getting old. Hope all is well with everyone stay warm thank you. Mark:roll:

Thankyou for the quick replies gents I was just thinking under pure curiosity as to other members thoughts on what they have done with their filter arrangments. I have 818 tractors and I love them, not much to really do to them but service and loving they are well built. Thankyou, Mark

Hi all any recomendations for spin on fuel filters for the 809 series trucks with 250 cummins motors ? Does anyone know off the top of there head what the Gallon per Min fuel flow rate needs to be. ThankYou, Mark:roll:

I dont have a fuel fired heater but I do have a coolant heater in my m818 and I dont think there worth a hoot I just drove from Dogheads house to mine in a snowstorm last friday dont get me wrong it did take the edge off but it was cold out took me eight hours to get 180 miles I would go with...

Thanks Reuben I will check with Napa and Cummings Northeast. Mark

Hi all its fixed someone put a different type handle on a airvalve therefore its was open instead of being closed nice I like it lol my fault thanks guys. Mark

Hi all was wondering for sometips my M818 will not build sufficient air preassure to drive on or kill the buzzer. We swaped air govenors from one truck to another and this did not help. Disconect line at air govenor from pump and no air. If I remember right I this is correct ithas to build...

Hi all if any one out there knows a common off the shelf part number and store to get a replacment electronic fuel solenoid on the 250 cummings injector pump? The screw is real hard to move so I was wondering if the solenoid needs to be replaced ? If anyone can help it would be appreciated. Mark

Follow the wiring from the starter around you will find it runs to the stator which is right behind the fan shroud check all conections and I belive but may be wrong but i think there is a inline fuse in there somwhere send me a pm and I will try to email you the manuals. Mark

Yhea go the gulfway or jctaylor best route will save you some money. If your State Farm Agent puts that truck under a normal policy ouch I may wrong but I just looked at a commercial policy for renting a ryder tractor and we all thought diesel fuel was expensive whew good luck. Mark

Sounds good Doghead I really appreciate your efforts, Mark

Doghead and lance thanks for the replies, let me know if you make it up on monday doghead I shure do have a many thanks to you for your help. if you do make it see if the trucks have heaters if you would and fuel im going to try to get a tag for one truck and use to pull both home if i cant get...

To the almighty one JEEP CORP, MDL: XM818, 5 TON TRACTOR TRUCK, SN: 05C39370C12413227, WITH WINCH, 6X6, VEHICLE RUNS, 29, 610 MILES, SOFT TOP, CUMMINS DIESEL ENGINE. 12-04-2008 fort drum,ny nsn #2320-00-050-8978 Thankyou,Mark