Search results

Ok recently purchased this generator off gov and all fluid were drained .I put the oils,coolant,new batteries and fuel to their appropriate level.i turned the knob and nothing is showing on the gauges,tried the inside switch ,the motor only turned and almost run with starting fluid ..I know bad...

I was able to check the governor and the filter which had a little pieces of rubber assuming its seals from somewhere..the transmission had some slug once I took the bottom cover and cleaned very well.I ran it today move a little better and stalled at times in second and almost came to a craw.I...

Thanks for your response.Once it passes second gear everything works just fine and runs with no trouble even on incline.

Not it’s not

No it has only started recently will observe the rpm’s and revert back to you thanks ..every info helps

Hey guys ! Need some input here ,I have had some issues with my truck,each time I drive it,it’s seems the Truck takes too long to engage in third gear and so the first thought was charging the filter and fluid..did that nothing or little change..second I adjusted the throttle and...

oK ! The mystery is finally solved ! its the wiring between the shift and the transmission that had a short and was causing the trans to act funny,we basically taped and followed and the wiring to the solenoids and that it fixed the problems and now the truck runs like a champ !thanks to my...

Thanks for your input,it's up and running ;)),it was some electrical short between the gear lever and the transmission.

Lol ! but seriously,the truck is like stuck and just shaking not trying to move and actually does cut off

Anybody ? answers,please !

That's what really pissed me off

unfortunately no

I have been told the truck was actually in high range..

Ok gentlemen this is really bizarre, my truck still giving me issues after I believe was heavily focussed to get out of a hole,and somehow the transfer case seems to engage fine ,but the issue is whenever the truck is engaged in drive it keeps ''rocking'' and then tries to cut off and does...

Hey guys could someone give me information on the transfer case switch, I know these trucks are supposed to be driven in high but how do you turn the switch or convert to avoid damaging the tc.will appreciate a lot.

@R Racing. What has to be in high range and is there some switch?sorry don't know too much about it .thanks for your reply .

Ok will surely try that,hope that will fix it,thanks for sure !!

Ok Guys , here is my situation,my brother drove my M923(NHC250),off road and went through some rough terrains and now tells me that when he engages the truck in 1-5 the truck ''jerks or drags'' until he puts back in 1-2 it drives fine and has the jerking issues when he puts the truck in reverse...

Hey guys ! I recently bought a 1967 Kaiser and I have some issues, its giving me a hard start and also I found some level of fuel in the crank case besides the loss of power, its also giving me some really black smoke and white..hopefully i can get some help this is my new project.

cant seem to locate the diagrams in the TM's for brakes,please help thx