Search results

If you don’t mind that would be great! I would think aluminum to be honest. Copper maybe??

Was actually just researching this. Are the radiators aluminum? If so I think I can aluminum welding with low temp aluminum rods and propane burner

So I found a pinhole seeping leak on my radiator. Right on the top flat portion. Has anyone found an aftermarket radiator that fits the FLu? Don’t wanna spend 1000$ on an old stock one lol

probably

Wish we had a local Napa. Closed down two years ago. All we have is auto zone and they looked at me like I was stupid. I said “they’re 24 volt” and they were like “sir, all cars are 12 volt”. 🤪

Does anyone know part numbers for the indicator bulbs? I need a couple for the 5 lights above the Speedo (parking brake indicator, pro engage etc). And also the bulb that goes in the volt meter. It’s a different one. Can’t find any part numbers.

Replacement wiring harness update!!! Replacement wiring harness update She runs! Had some weird issues with a popping heater fuse at first when I was turning the master light switch to full running lights but I think I have that worked out. I believe we had some of the 4 pin connectors...

Replacement wiring harness update She runs! Had some weird issues with a popping heater fuse at first when I was turning the master light switch to full running lights but I think I have that worked out. I believe we had some of the 4 pin connectors behind the ignition switch misconnexted...

well, i started on my wiring harness replacement. with help to a couple members on here, i got the loader removed (way easier than i thought) and the stock harness out. more than 30 wires were completely severed, missing, etc. from rodent damage. harness removal wasn't too bad actually. i...

Built this today. Got a 5000 lb adjustable weld on trailer jack from harbor freight for 79$. Talked to a couple members on here for height etc. this one is adjustable from around 24”-60”. Welded on 2x4 box steel and drilled hole for pin. I’ll let you know how it works.

trying to get everything I need together for a big project. Mog is at my ranch a distance away from civilization. Can anyone tell me the bolt size on the loader that you remove to take the loader off? The two on the bottom where it attaches to the mount. Want to make sure I have what I need...

my brother had two... a SEE and HMMH. he sold the HMMH with 88 miles on it in IMMACULATE condition for around 34k. he sold me the 419 for 10k. had around 90 miles on it after rebuild in 2000. hour meter shows less than 100. liteally, almost mint condition, everything worked, until mice got...

just pull out the defroster outlet on the left side of the dash. it just snaps in place. you can reach your arm in there to grab it.

i had an eerily similary problem. there was a blockage in the fuel line where it exited the sediment filter. something had dislodged and blocked the fuel line. it was providing enough fuel to idle but would die out in just a matter of minutes. i ended up bypassing all the fuel lines before...

I actually just did this hoping that would fix it after I read someone else did the same. No luck. I replaced every fuse and cleaned with a wire brush in the terminals.

Thank you for the reply. The relays you talk about are they the ones by the switch that controls the upper lower lights under the hood?

With all of ya'lls help, i've fixed a lot of issues lately so thank you! air pressure release valve replaced this week, fuel delivery issue solved, etc. My next issue is BLINKERS and HORN. 1. blinker switch doesn't do squat. when i hit hazards on, they blink SUPER fast (like 5 times a...

bought a lot lately from expedition-imports.com. great guys

ok everyone, i got it all fixed. i wanted to report back in case this helps everyone. Background is all above... this weekend i did the following: 1. replaced lift pump. no improvement. 2. replace EVERY crush washer on every line. no improvement. 3. pressurized tank. no...

Thank you!!