Search results

DLA=Defense Logistics Agency I was wondering why the Marines are able to pay a contractor to remove the restricted armor, commo and armament parts to be sold as scrap separately from the HMMWV, but all the US Army HMMWVs, are destroyed by a contractor, paid by US Taxpayer money, then all sold...

I've been looking for a solution like this for awhile, just for the safety aspect instead of the GI 60w incandescant bulbs, thank you.

I'm hoping I can remove the throttle shaft out the driver side without removing the governor/guide pin, the governor on spring still moves front to rear, so engaging the notch again on re install "should" not be a problem. I saw on BoobTube somebody altering the governor rotations to coax more...

That drawing covers both 6.2l NA TH400 3speed and 6.5l NA & Turbo 4L80E 4 Speed. Instructions refer to inset bubble pics with specific instructions that differ between the 3 drivetrains. I was hoping somebody here had already done this, could verify removing that removing Allen screw Part...

I bought mine from Jegs last fall with a 20% off coupon. It comes disassembled, mine had some faults in construction, the 4 position quadrants on the lower legs were welded on wrong, the cross way support strut was too narrow to lock into the notches. I cut the welds, pried them off with a...

Application: Stanadyne DB2831-5149 Injection Pump on 1995 M1025A2 6.5l NA Fault: Throttle valve leaking diesel out the driver side when vehicle reaches warm idle speed, diesel pools up in the gallery between cylinder heads, cascades over the transmission bell when vehicle accellerates, diesel...

I tack welded a Harbor Freight 3/8" drive hex key to the drain plug. Then bought a Craftsman 3/8" drive hex key to replace it in my tools. And I did disconnect the batteries and Smart Start Box before MIG welding the drain plug, as others here have recommended.

Diesel Care & Performance in TN was recommended to me by Rob R. He owns several HMMWV as well as sells parts from time to time. I trust his judgement. I contacted them about a DB2831-5149 for 6.5l NA M1025A2 but, have decided to attempt to replace the throttle valve O rings myself, which...

I used a 20 ton air over hydraulic bottle jack on a cinder block, then a 4x4x6 wood block and 2x4x6 wood block between the jack ram and the body tub. Lift the body tub slightly to take pressure off the frame rail/body mount bracket cross bolts. Use impact wrench to remove the 1/2"-13 cross...

I'm disabled, I bought a High Top Creeper from Jegs, since I can't contortion my body around the front A Arms and splash guards to get to the 3 5 pt T25 screws on top the DB2. Its going to be so much easier for me to use an electric hoist on my oak tree to lift off the hood so I can roll...

The 6.5L Turbo Doghouse: You can poprivet/cherry rivet/Permasilk the trim pieces in place then use a sawzall to remove the excess body hull that sticks out past the trim.

Thank you, this is relevant to my current motorpool gremlin issues. Ordered a fixed screwdriver a well as a 1/4" drive socket bit. I was getting set to remove my hood using an electric hoist strapped to a tree branch tomorrow so I can get to the throttle valve to replace the O rings and seals...

I have a 6.5l GEP-Turbo engine up in Navarre, FL, that I will be listing for sale soon. I have the doghouse opening trim pieces, too, and maybe a turbo doghouse that needs a tiny bit of fiberglass patching.

I've been trying to get the O'Reilly 6TLs since October with No Joy. Are the Napa's for $40 more available at all?

I thought about trying to figure out a way to mount that style evaporator on the ceiling between the front seats.

Think maybe the backflow valve on your fuel/water filter inlet was clogged or gummed closed? I was told that valve isn't really needed, by one of the professional HMMWV wrenches. I'm just a parts changer who can read the 3rd grade level TMs and the M998A1 AMG Troubleshooting TM. Mattguy, I...

Same situation, 2003 M1123, wait light comes one, acts like it wants to start but getting no fuel. I have tested both sides of the fuel/water filter cannister, have fuel going in and fuel shooting out. I unplugged IP solenoid Wire #54A, have power to it, the solenoid clicks. Cold Advance...

Well, shucky darn! How about that. Are you part of our GMV Group on FascistBook? We found a Square D/Schneider Terminal Block bolted in the outer battery compartment for expanding 14v and 28v accessories, as well as some trucks had push button circuit breakers through the sides of the battery...

I got a refund on my original Lot#48 $14,000 Buy It Now, got two runners off a non-published list of GMV in a direct sale organized for a 30 truck lot, $4000 each plus the fees on each truck. Granted, they butchered the B Pillar Turret Support Tubes, sheared them with the Volunteer Fire Dept's...

Correct Supplementally Armored Windshields should be TM 9-2320-280-24P VOL1-Figure 226 Item 36- LH: Part#12339508 RH: Part#12339507 i edited the Item and Part Numbers, my left eye is swollen shut sorry. I just bought 2 of the LH SA Windshields from TNJ Murray in September for $225 each plus a...