Search results

These are the plates I was referring to.

I have an 87 M998 6.2L. I'm trying to find the 3 info plates that should be on the front of it but I'm coming up with nothing. Does anyone have any suggestions on where to get these? Any info would be greatly appreciated.

Here’s a fun question. I went to an exhaust place to get my exhaust fixed. It turns out that one of the reasons that it was so loud in the cab was because the exhaust wasn’t connected. The guy fixed it and it’s much more quiet. My question is would this make my engine run cooler? (It is).

Thanks for the info!

Quick question- I’m installing a new soft top and I’m running into trouble. How do you get this part in that part? I’m running out of options.

What's the grounding wire for that attaches to that one point on the marker lights?

Im having an issue with some 24 v LED headlights. the drivers side works fine on HIs and LOs but the other one wont turn on at all. I also swapped out the marker lights that had the ground on them. These just have a little metal ring on one of the screw holes and I'm not sure how that would...

So I need to get both? I would guess the flange one goes in the fording exhaust?

I’m installing a fording exhaust and I’m having an issue with what gasket to use. When I look it up sometimes it says flange. Other times it says donut. Which is the right one? Any help would be appreciated.

Will it make it ride smoother and less noisy? Not possible. lol

This has to be one of those "Why the hell did they design it like this" parts. They could have made the knobs twist off but noooooo.

I checked out the map. There are a few right near my house that still refused to do it.

I was also told to not bother balancing the tires since i only go 50 mph. 3-speed.

I tried discount tire. They said they couldn’t close the hood on the balancing machine.

I'm having trouble finding a place that can mount stock tires on the stock rims. They all say that their machine isn't big enough to balance them. Any suggestions where to take them to get this done?

it’s going over heat and sound insulation. I’m mounting the sub and amp on it.

I'm going to be putting a piece of 3/4 in plywood down on the tunnel to help with the sound insulation. I'm going to use self tapping screws. Before I make any colossal mistakes what is the clearance under the tunnel? I know the fuel tank is under there and I don't want to puncture it.

Whats it mean if it only does the quick flash once in a while?

My M998 is so loud I cant hear myself talk to myself.

Is there a better set up than the round knob for the hard door latch? I keep slashing my knuckles when I open my door from the inside.