Search results

I actually was doing bearings today and about 4 of 6 inners needed help. I took a thin screwdriver and a small hammer at the back of the bearing and tapped it down between the bearing and the spindle and from there it worked off fine. smear a little grease in front of bearing to help it slide...

I'll be bringing an 8ft. fiberglass military 2 piece antenna mast - sorry no base and a 5 gallon jerry can in perfect shape. If interested pm me and I'll hold them for you. Edit-Jerry can is spoken for. CT

Hey again Almighty Carnac! m35a2 wo/w vin# 4h417719238 stenciled inside both doors 4h4177 From Ft. Jackson Frame # is 012519238 Thanks Again and donation mails out tomorrow. Hope to meet ya at Ga. CTMustang

I called them wed. last week and placed another large order and it was at my shop on fri. A little advice I always give is to pick up the phone and place your order. That way there is no wandering and if they don't have what you need you know right then. Jay called me back about 10 mins. after I...

That gal would look alot better without the flag around her! When she turns 18 howabout posting some more pics some where else without the flag! [thumbzup]

:ditto: on the 900x20's

OK RAYZER- and now back to our regularly scheduled program already in progress!!!!!:cookoo:8-):cookoo:

And from NC:beer:

I wish they were a little closer to NC. Yaw always get the good stuff.LOL CT :beer:

It sounds like your bearing preload is too tight. If you have an understanding of how the seals work you will understand. Guys I know that were in service during vietnam and later all agree with the torque to 50 ft.lbs. then back off an1/8 to 1/4. It has worked without fail for me for years and...

My TM simply says to torque the inner nut to 50 ft.lbs. and then back it off 1/4 to 1/8. This is how I have always done mine and have had many years of trouble free operation. CT

Nice and what paint did you use CT[thumbzup]

I will be looking for troop seats-A springer seat and headlight panels for my newest deuce.And dont forget a cargo cover. [thumbzup]

I remember it being on the dash but it is not on this deuce. If someone could read theirs and post it here I'd appreciate it. CT

I am going to submit my 97 tonite and was wandering so I only have to do it 1 time what are you fellas putting for the weight and then the GVWR on a deuce? Thanks CT

I finally got my deuce home from GL this weekend. The data plate on the dash is like a generic with only the 6 digit registration # stamped on it. I called GL to see what they had on it for year and manufacturer and was told twice that was all they had also. well on the description during the...

Hey Joe This is the number I was given by a nice lady at GL. It is Battle Creek-DLA 877-352-2255. Mums the word Joe you didn't get it from me. LOL good luck8)

A vietnam vet who was at Adams place informed us that the bracket was for a fire extinguisher. strange place for an extinguisher don't you think.

JAy I think I will keep this one. I will probably look for someone to trade the hardtop to for a softtop and flip the headlights and repaint and troopseats and drive it. I will probably add electric wipers-it rained buckets all the wat home so that brought back all the bad memories of air...

Neil Hendrix and myself started the day at 0600hrs this morning. After loading my truck we took off for Ft. Jackson SC. A big thanks to Adam for towing it off base on Thurs. When we got to Adams place I was thrilled to find the truck in greater shape than I had expected. We swapped around a few...