Search results

I’m working on a 531 with no power. The breaker is also tripping once it starts. The frequency and voltage gauges both work and show correct values. I have 120 at the gauge and 120 on the back of breaker labeled “a+ and a-“ I think that’s the right label. Pretty sure my readings are on the...

I have made a post prior to this on fixing up my 003 for my step dad I’m continuing to fight this issue. This set has 236 hours not on rebuild. It’s a 92 model I believe. The issue at hand is it’s a dog to start. Spray a good sniff and it’ll take off but with out it, it will not. Once it pops...

Guys I’m at a complete loss here. I can not find glow plugs or a Source to purchase beside green mountain generators. They have 1 in stock @ $125 each. from what I’ve read the correct part number is the champion 182ch42 plug 7/16x20 thread every single glow plug I’m finding that the same...

I recently picked up a clean unit with no rust with 289 hours I know it sat for a long time so I assume I have varnish/stiction going on so far: Entirely new fuel delivery system all new line filter based filters and lines when I crank it I’m getting very little smoke if I give it a small...

Hey guys and gals! Haven’t posted in a while just picked up a mep-018a at auction seams to have some hours on it but it’s extremely clean and not even sun faded. I paid $360 for it. I assume I did good but not sure. I’ve read some threads but they seam to be older and more on the technical...

I recently purchased a 1988 m35a2 deuce and once I got to the truck I needed to bleed the brakes. I flip the door up and found the mc. Now the weird part, it’s a plastic reservoir directly where the cast one should be. Added fluid began bleeding starting with the Mc and working from further to...