Search results

Well, I noticed at my other frames, that at all frames I have, there were already all the holes predrilled in that location, which makes me wonder, if those brackets were to be carried by wreckers only, and to be mounted prior the towing/recovery and then removed, or if they were a modification...

most likely semy gloss forrest green.

Are these the pic's you're looking for? good luck.

Well, I had the same problem, (actually still have the same problem) and I found that Dodge has in the under the hood wiring a point where a couple of copper wires are welded together. from that point goes a voltage sensing wire to the external voltage regulator. Or at the weld or in those wires...

Well, I guess it's the same all over the world, you got your truck painted with whatever you could get your hands on. I heard stories that even back in the second ww, the Germans (who had strickt procedures for everything, just as nowadays...:lol:) got painted their tanks with a mixture of...

Hello, I'm wondering, did the army change their desert paint at a certain point? To me it seems that the hummers and other equipment that served in the desert storm operations were a bit more grayish sand than the latter type trucks that served in Afganistan, they seem a bit more yellowish to...

Weird, your attachments doesn't work? Yes, I know, when I lived in Holland, and I attended a MV show I came back at my truck, and found people crawling all over, standing with fat mud boots all over my new paint, and when I asked if I could do that to this guy's car he looked at me as if I was...

Yes, And I like it that there are people like you that choose for a vehicle and renovate it from A to Z and then start modifying it to their likings while moving and camping with it. Keep on going!!!

Hello all, Beeing in europe, I only could wish for these trailers in such a nice state! Mine is a '61 Parkhurst M-101A2 which i'm busy refurbishing at the moment, Including body work (cutting holes out and filling in with fresh steel, and finding a solution for the horrible front seam!) Other...

@ JR2980, What I mostly do when something new to me arrives at the premesis, I go all over it, undo all things which are easy, but for sure brakes and bearings, have a look for in which state things are, and by putting them back, i have a go with a pot of coppergrease, and put some on aal of...

Hello all, I'm redoing my M-101A2, and got a not too bad PVC coverin desert tan, beeing outside all the time, it got badly spotted weathering and algae mostly I think. does anybody know how to get this in a as pristine order as possible? this afternoon I tried some with black soap and some...

That's a lot of seals!rofl

I realise that this is an very old post, but since this is a problem where many a M-880 owner runs into, i'd like to share my 2 cents... To me it seems that there is nowhere nothing written about the spec's for these springs. but spring basics says that to work at it's optimum, the spring...

Put it in another gear then P or N, and try to start???;) and if i'm correct, there is somewhere on the steering column a tab welded to push a slide connector onto, so you can run a wire directly to: The chassis, or the minus(-) of the battery? BTW what a beauty!!! I wish mine was like that...

Hello, I like to prepare a presentation board/display for my W-200. next week we go to a fair and we'll have my W-200 on display. does anyone of you have some examples/suggestions? Pic's maybe? Thanks in advance!

I would suggest to widen the original rims about 2", since the original tire is 9,5 wide, and these Hummers are 12,5 (I thought), that solves the wandering you'll normally find with Hummers at stock Dodge rims.

I would like to suggest that if you have a look on the inside of the cab, underneath the dash, door covers, or behind the banch, you'll find spots who are never touched by any GI, i like to think that that is mostly the correct factory shade. good-luck.

well, if he is in business or not (officially then, that is) i don't know, but i DO know, an there is more than one post on that to prove, is that when other people here tried to order plates, an left him e-mails or thelephone messages, he never returned anything, playing dead... I think it's...

Hello guy's, this one is NOT in business for a long time now, and i doubt if he will be again? it's a pity, because with the former ownwer it was one of the best sources available! owner from MVDATAPLATES, if you read this, come back, be active again! the community needs you! or sell to someone...

I honestly don't know the shipping costs from the usa, though i doubt it would be more than a heavy lettre?