Search results

IN

What rating shocks are springs did you install? Any changes in ride quality?

I've bought 4 sets of the HMMWV Mud Flap Kits from Milbot on ebay for $60 shipped using Make An Offer, some of the poly closeout panels were cracked from the mfg's piss-poor packaging method, though...

Rotating Amber Warning Light RAWLs or I've seen another switch to something associated with Maintenance Trucks for a On/Off Welding Mode.

Kevin, the Organization Maintenance TM Vol 2 9-2320-280-20-2 starting Page 34 shows the steps, procedures and drawings how to replace the CDR valve assembly. Edit: But right from the start looks like you are missing the CDR Valve mounting bracket (TM 9-2320-287-24P1 Figure 7 Item 4 Part 12339137)

1994 M1097A1 Green Beast is now running. She would just crank and crank after I installed the missing check valve and fuel line into the fuel filter cannister, was preparing to start loosening injectors but found an older thread by Tobash that the fuel injection system needs quite a bit to...

My recent acquisition 1994 M1097A1 out of Albany GA, looks like the Marines were getting the Army's ragged out, hand-me-downs to M12001, but the Marines weren't having it, they demanded a newer, A2 truck: Truck appears to have been an Avenger Missile Truck that was reissued to the Marines as a...

Bought 1994 M1097A1 (6.2l, TH400, NP242?) in October, EUC approved this month, picked up from Albany GA on 11 March. Had some rough parts but was recently pulled from preserved storage. She is starting to look respectable again. Just the curbside frame extension was damaged, look like they...

For Nissan Armada SUV? Approx 207inches long, 79 inches wide, GVWR 6800-7100lbs, 9000lb tow capacity. The springs soften the road contours while the shock absorbers reduce the body bouncing on the springs. For about $130/pair I suppose it couldn't hurt to try, other than the physical effort...

They are PacTool (Performance Advantage Company) Clamps, available from the Mfg or your local Fire Department supply house, expensive though, You can probably get by with Quick Fist Clamps at 1/3 the price. PacTool does mold that Pioneer Tool Tray style clamp in a Coyote Tan now...

There is another Thomas compressor nearly identical to the above 24v but in 12v, which are under $500 new, if you have the dual voltage alternator you can power it but only use the air when the engine is running, or wire it direct to the single battery.

There is a near identical Thomas DC air compressor in 12v for under $500 each, if you have the dual voltage generator, but you will only be able to run air when the engine is running, or wire it direct to one battery for offline use.

The SOCOM GMVs have a few different on board air set ups. Some GMVs have a separate Hummer H1-style air compressor shelf bolted to the front, driver's side cowl. Others move the windshield washer reservoir inboard to make room on the cowl for the Thomas 24v TA-4101-DC air compressor in the...

I bought an M1025A1 data plate off the prohibited from posting links site.

There is a backer plate with threaded inserts that pop rivets to the windshield frame, that the turret Weapons Support leg brackets bolt to. Greg 86HMW makes a direct copy of them.

EUC submitted to TSC 14 January, approved today 4 March, Army 1994 M1097A1. So hoping to pick up in Albany on 11th.

I have a 94 M1097A1 in Albany for which the EUC should clear any day now. That one, I'm not sure if I am going to drop the 6.5l GEP-T/4L80E/NP242 and hard top/turret kit on it or just throw a 4 man rag top and doors to flip with a title real quick. I want to use my keeper truck for youth...

I have a 1994 M1097A1 Avenger HMMWV EUC clearing any day now, it has the full umbilical I believe.

Just ask Marissa Tomei about posi-traction and limited slip differentials.

There is a Fox mfg remote reservoir nitrogen-charged shock similar to the Rod Hall product at about 1/4 the cost. There are probably 4-5 different front spring types and 4 maybe 6 rear spring types.