Search results

Mine has a axle vent installed in the master cylinder with no problems.it had previously been hooked up to the draft toob.I know the motor pool sargent at the local national guard and time to time ask him and the other mechanics questions about my m35a2.they stated concernig the venting of the...

I picked up hood pads and side cover pads from saturn surplus. my hood pads had been riveted on. the pads have deep holes that the rivets sit down in

You can purchase nsn numbered tools from advance tool company.they list 43 pages of tools and have been in business since 1953. 231-587-5286 www.advancetoolcompany.com

When I put new titan tires on my m35a2 the flaps came with the tires. military toobs $20 and $35 a tire to change. a good truck shop can deal with the spit rims safely.beware the evil 1" drive impact wrench it puts out 1600ftlbs and if they do not turn it down you will not get studs or nuts off...

I suggest using d.o.t. fittings from someone like parker.they have truck air brake hose also.if you pop a hose or copper line in can be very dangerous especially with braking.if you look at your fittings they are probably stamped with d.o.t.

RE: Re: RE: Comset Ideas for Deuce Cab? I have a vic-1 in my m35a2 I love it. drawback it is not a cheap system.I use cvc helmets. it has a passenger box and one in the bed.it is tied into the radio also. if you do not buy new componets you can get into a real nightmare.

RE: Where to get ubolt for mounting the M-66 legs to the cab I had truck spring shop make #8 ubolts in 1/2 for me. they can do any lenth or size for you with nuts. there is alot of weight and stress applied to them when truck in in motion.

RE: Re: Headphones recommendations while driving Duece I use vic-1 intercom with cvc helmets coupled with my radio in my m35a2 the noise canceling mics are great. I can talk to my passenger or someone in the troop seat in the back.

Give Eriks military & industrial surplus a call $20.00 for new governor 760-747-8863

I changed mine out with stainless works from turbo to tip it will outlast the truck an then another give them a call 800-878-3635

RE: ring mount Q I have felt for the seals on the top and bottom if you are stripping it all the way down

You can get grade #8 ubolts made at a truck spring shop with nuts in any size and lenth

I have both hard top and gma soft top. I do not see any difference in noise level or heating in winter it is alot more easy getting soft top back to use my gun ring than taking hard top on and off. the gma top is insulated pretty good

My bell housing had a plug in the hole on driver side about halfway down housing. air switch for fording kit and air shift share same air supply steps bellhousing air down to about 2psi.with a regulator.make sure air intake and turbo toob go up almost even with exhaust stack. run hose from air...

olympic controls bought out tokheim $244.00 with factory warrenty www.occorp.com 847-742-3566 I have been down this road hope it helps.

Best thing to do is take it to someone who does big truck alignments about $40 they will put it on rack chalk line tires and set if needed

RE: M35A2 - which radio used - where to install radio anten I have a rt-841/prc-77 under the passenger seat the antenna mounts on the side of bed with spacer and mount. I also have a vrc-1 intercom system so I can use my cvc helmets to talk to passenger or on radio so you do not have to scream...

I use shell super duty grease it is mil spec part number 70437

I use krylon od green,black,brown, and tan flat paint with rustoleum rusty metal primer. you can buy krylon in bulk cans from ace direct 800-441-4223 but the drawback is the hazmat fee

ok guys here is the company who makes new in tank pumps for the military. olympic controls corp. 847-742-3566 www.occorp.com they are $244.00 with factory warranty they bought out tokheim hope this helps