Search results

I posted these pics of the fuel filter I use on my 3 CUCV's. In this thread below. http://www.steelsoldiers.com/cucv/39552-leaking-diesel-filter-housing-new-filter-didnt-fix-issue-what-do.html These are a spin on filter / water seperator that use the standard mounting holes as the stock...

I run a 37 Hummer tire on the rear of 2 out of the 3 of my CUCV's (all trucks and have the 4.56 gears) and run a BFG Mud terrain in the front that is in the area of 33-34 inches tall. From the calculator at the link below you can see that this gives me a lot better road speed than the stock...

Columbia Electronics also sells radios previously used or issued by US Government. Main page. mbia Electronics International, Inc. Their page on the PRC113. AN/PRC-113(V)

Does your CUCV have a oil cooler ? 2 of my CUCV's do the M1008 and one of the M1028's have a small radiator that connects to the oil filter base area with aprox 1/2 steel tubing. Ill attempt to get pics if Its not too cold when I get home tonight.

Keep in mind when you reduce the diameter you are reducing the belt wrap and will have less contact between the pulley and the belt = more chance of belt slipping. Less belt wrap angle = less drive surface area. Google this term. Ratio of pulleys = crank pulley / alt pulley ETA: using a...

No more pics as its gone, I sold it about 4-5 years ago to a guy up the hill from me. I originally bought it from Brad when he lived in San Pedro some 10 to 15 years ago, then picked it up from him at westside NGRR. It had a PTO and I was in the process of putting a 5 ton winch with the...

Here is one of my CUCV's this one is a M1008. Looking for the other pics now.

I tend to go overkill on battery cables. On my 5 ton tractor I run 4/0 cables with the AN ends and on my CUCV's I run 2/0 cables also with the AN cable lugs.

If you want to maintain the 24V starter and the two 12V alternators then YES you need the twin resistor pack on the firewall on the other hand if you want to run a 12V starter you can bypass the resistors on the firewall you would be advised to follow the link at roscommon equipment center to...

I took the liberty of correcting your spelling and adding the link.

All 12VDC. Having a book on the electrical system would be a good investment but you can also find the info in the TM. I found this several years ago. /.25ton/TM-9-2320-289-34 CUCV Series Trucks at intermediate direct support and general support level Manual The huge resistor behind...

From what I understand the only 24V component on a CUCV that is needed to make the truck operational is the starter. While you would need to change more than the starter as you don’t want to swap out the 24V starter with a 12V one and then run the 12V starter on 24V. The volt meter on the...

I have 3 of the CUCV trucks, I love them. I have 2 M1028's and 1 M1008. Both of the M1028's have disc brake conversions in the rear, as well as running a 37 inch tall tire to get a better road speed. I bought the tires from this guy 95% trear for $100.00 each. 95% tread 37" H1 Goodyear...

I think this is the same as the one on the 6.2L CUCV engine is it not ? VEHICLE RELATED ITEMS, INSTALLATION KITS, LIGHTS, MISC. SiteDelux COOLING ASSY. $39 EA. MURPHYS SURPLUS WAREHOUSE: LOCATED AT 401 N. JOHNSON AVE: EL CAJON, CA. 92020 ( NEAR SAN DIEGO) 619 444 7717 FAX 444 6750...

Door markings of my EX NAVY 1 ton Chevy van. While this isnt the Door marking of my CUCV's it was a ex NAVY van I currently own. Bought it in about 1996 from one of the last base sales at Rough and Ready Island, Stockton, then had to drive to Lemoore NAS to pick it up.

Ill dig out the pics of my pump and motor this weekend. The motor is a CHAR-LYNN by Eaton. Great Lakes Fluid Power The pump is a Chelsea or maybe a muncie. Will look for the model numbers tonight. I picked up a few things here for my winch setup on my CUCV...

I saw the pics of that adapter as well and feel the same way. I have been meaning to get to the machine shop and have one made to fit my rear mounted 20K LB Braden winch. Have everything else just need that adapter made.

Makes sence, thanks for that. But consider this when a pic is hot linked from another source it takes less bandwidth to display the pic than if it were uploaded to this site would it not ? IE fewer resources drained on the steel soldier’s website. And it may be a slight annoyance but if...

So your not concerned about links to pics being dead or if the pic at that link is deleted just pics that are hotlinked from offsite ?

Pics of shaft, and Dimensions ? IE the shaft on my M1028 (with NP205) has a slip that fits into the rear of the TC. One of my Civilian trucks has a shaft with a yoke for the U Joint to fit into. Didn’t know if the NP205's in CUCV's are all the same or not.