Search results

You might have small cracks in the suction/return line. The hoses might not be wet with no pressure but they could suck air when under a vacuum

I bought a M35A3 on 12/2/15, paid on 12/3/15 and picked up on 12/7/15 but I haven't received any paperwork or emails. Do I need to contact GP, or do they contact me 1st?

Ok thanks. I'll try to cross reference the numbers. I pulled it and it looks great. There were a small amount of metal shavings on the head but not too many. I bottom it out and then backed off 3/4 turn but I had the same results. I turned it in another 1/4 turn and had the same results.

Ok I'm getting OL for ohms while measuring the mag pickup. I'm bring less than 1vac while using the dead crank. Any idea what the mag pickup pn# could be? Thanks for getting me this far

Sorry for the hijack but I am having a similar issue. When I start the generator I am only getting 6v from each leg, and 12v across two lugs. The voltage gauge on the panel reads the same low voltage. Turning the voltage adjust knob doesn't make a difference. This is with the ac connector open...

I've done a bit of research and found out the wires in the above pic go to a linear actuator, which I assume is acts as the throttle. The wires go to a Woodward control box. Terminal 9 and 10 go to the actuator but have no voltage when the main switch is in aux prime/run, or prime /run.

Neveremind