Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Sorry if this is viewed as a double post (I posted the list in my M1009 suddenly died thread) but I think this information might be helpful to people with injection pump issues.
Below is a list of Stanadyne DB2829 pumps which can be helpful. In general think of GM having 2 pumps a year. One is...
A while back I had a dead short in my starter. I replaced it with a Chinese hunker junker from ebay. Has been working fine but I do not want to be in that situation again. Plan to rebuild my old starter. The issue is that my wrapping from the field coil have disintegrated and I got a spot...
I have been doing a lot of reading and wanted to make sure I was thinking correct before I start to tear into something that is expensive.
I was driving my m1009 down the interstate the other day after having driven aprx 80 miles over the past year. It started up like it usually does....SLOW...
I have searched the forums and tired many things for similar issues but just today ran into something quite interesting with regards to my lights.
Prior to today:
My passenger blinker was a slow blink (original blinker switch went bad and replaced with what is comprable to flasher...
So I just wanted to post up a little experience of mine.
Firstly I have a M1009. Added a second tank (32 gallon) in the engine compartment. Then have converted my truck to run on the two tank system. I have run it on ATF, WMO and WVO. Have clogged off one filter running mainly a mix of 5...
On May 30 while en route from STL to Phily in my Flat black M1009 I was fortunate enough to have two civilian military spotings. First was some fella towing a trailer with a stryker stretcher and some sort of OD box on the back covered with a tarp and lashed down. If I had to guess it was a...