Search results

Just curious, with all the R1's and new models out there now, I wonder how many of these tubs are being reused and if there was any correlation to tub numbers and any order when rebuilding or if they just pointed at yard with a wrecker and said go get me one. Might be fun to track just tub...

TCM's (pn 16196390 tcm390m, 16147609 tcm609m ) are unavailable thru RockAuto, Oreilleys, Autozone, Parts Plus, Napa, and Auto Plus. As in, no availability, no R&R. Any other suggestions on places to purchase that isnt $500 for old style or $1k for new PCS version?

Removing from a M1097A2 because a SECM wont fit in the rails by .5" You get the rails, the tailgate extensions, the longer tailgate chains, the power cable adapter (not panel with tcm cb and relay mounted to) Prefer pickup in Guymon, OK unless you arrange shipping. Love to put on green iron...

Converting a S250 carrier M1097A2 into a SECM, didnt have the half doors that are needed with the maint bed, so next best thing is to engi-nerd your own. Only store bought items are the hinges and a 3/4" nut, the rest of the parts came off the truck. Grind off the rivets that hold the support...

Purist read no further, and hateful commenter about inability to operate a 3 lever light switch keep your comments to yourself, i did read the other post I consider these switches unreliable, they fail like this one did at the most inopportune times, flashers power, button C melted into plastic...

Picked up a new tool, need a wiring schematic or someone with one of these to explain where the power for the air compressor originates from. The one I have has been stripped, I do know there is supposed to be a on/off relay and switch on the left rear door that operates the compressor, but...

Today we had the opportunity to play a little with some power, have a 125KW genny that had an IP replaced and 'needed' to load test it to verify the repair, *not really but its fun* Largest load tester I have is Essex A698, We ran the load tester wide open, pulled 225 amps per leg, guessing...

So does anyone have a guess where all these tankers are going out of Hooks? I have bid some of the cleaner ones to over 5K, and some of the not so cleaner one over 3, and they all have cancer like they have been salty air sitting. I just need 1.... or if being greedy, 2.

So I got a Essex A698 a couple years ago, I have never used it as I have my ol faithful UMC that i love using. So today was the test day for the Essex, so pre use, pop the top and blow out the dust, and to my surprise there is no fan in the box. I ran 33KW for almost 1 hour and never noticed...

So to preface this whole ordeal, we normally drained this trailer if temps were below 20*F We use a M970 as a water tender to feed grass rigs chasing fires. Normally have zero issues with 20's , unbeknown to us the belly valve failed, stuck, had a catastrophic failure of some sort. As normal...

I cant remember the model of the water distribution trailer that the engineers used. trailer had a tall neck, 3.5” kingpin, pump and motor was on the rear of tank. Usually got pulled with a m916,

Looking for a tm, M1062 7500 gallon tanker. 9-2330-384-14 if you have it, could you upload it to the tm section please

If this isnt the correct category please move it. a friend of mine had a non runner jeep tug stolen, just a request for bolo

I purchased/traded the M970 from M35A2-az and the M916 came from Ohio, specifically for water to fend off a fire until the real firemen can fight fire. Well today was the day she paid for herself. Last Monday, 19 Aug 19, I walked out on the porch before supper, happened to look to the North...

Looked in all the TM's posted, used the search button, Reopened the ETM file and opened those files, still have not found any of the air schematic FO's in any digital form. Can someone point me in the right direction?

OK, its freezing time so AMi got drained to keep from freeze busting valves. Now is the time to do maintenance. Problem. Trailer runs uphill due to AMi being a M916 and not a M915 or M931, to the tune of about 13in difference front high. Attempted solution: 1600/20's, failed, tire is too...

So we went on another run earlier this week, only for a refill and just rough math in my head AMi gets about 4mpg at 55-58 mph. Also 55 is a bit slow going to a fire. She has no problems tanker yanking full to the top of water, so another .81 od behind an aux should get the top speed at 2100rpm...

I am working on an 831 that has a faulty battery charging regulator, has anyone used a NOCO g 7200 in place of a bad battery charging regulator? Do you have to push the button everytime to select 24v when 120v is applied? All of the video's show that you have to push the button to select...

Can someone get me the dimension for the generator spacer on a 60 amp? PN 12338186-20 nsn 5310-01-292-5354 Item 12 in photo

Did something change where we can no longer edit/add to posts?