Search results

Here are some pictures and dimensions. GE Hytrex 1 micron 20" long x 2.375 OD x 1" ID Zplex RO.Zs 1 micron 30" long x 2.25" OD x 1" ID Zplex pictures to follow

May be overkill but they are less than 25 cents each at his price. I have a general idea on how to set up the filter housing but I didn't want to reinvent the wheel if someone has already done this.

I'll try to get some pictures tomorrow but the 1 micron are 3 feet long, 3 inch overall diameter and 1 inch hole through the center.

Hey guys, looking into filtering some WMO. I read a lot on here and other sites but I have not found any information on homemade filter housings. I have a friend who buys lots of overstock and return items from various stores; Sears, Grainger, Fastenal, etc. He bought an entire pallet of GE...

Thanks for the advice. My worries are that it is an M35A3 and will not qualify for the older vehicle, no title clause. I am not a registered dealer but I guess I could look into getting a license. I mostly sell to loggers who don't need a title but every once in a while someone wants a deuce...

I just sold an M35A2 to a man in Tennessee. I provided him with a bill of sale and the SF97. The Tennessee DMV is telling him that I need to title the vehicle in Alabama (my location) in my name and then transfer to him. Have some rules changed? I have sold approximately 50 MVs to people all...

Stretch44875 is correct. I have bought several of the bolster trailers for minimum bid just to get the rims. They bolt right up, no issues. They look kind of weird but several customers had asked that the trailer set lower. One that I sold probably has 30k miles on it; the guy is a...

Where did you get the 12 pin end?

Links Added I added links to the files in the first post to make it easier to find the documents.

I am not sure why it's not showing up on the search function. It didn't show up for me when I searched for it and I uploaded. It shows up under my uploaded documents. I deleted it and uploaded again but the same thing. You can search for people, I use the same name 'pacebm' or you can use...

Just an FYI for the M35A3 guys on here, or to any potential new owners. I couldn't figure out how to load them to this site so I posted them on www.scribd.com. They are filed under the Army names for the manuals. LO 9-2320-386-12...

Good find. Can the diamond plate, 2 gallons of OD green and it will be perfect.

I like the looks of the dash! Good idea. Do you have any close up pictures? Tough looking truck.:grd:

Nice! I don't think I have ever seen one that low on miles. Most around here are between 10k and 40k. I hope your recovery was as easy as mine.

Yeah, I have had a few that were not so boring. I didn't mention that I had 4 batteries, oil, power steering fluid, water, and a 90 gallon tank of diesel with me. I also had NATO slave cables and an air compressor, not to mention the number to a local wrecker service.

I picked up my M818 yesterday from Redstone along with an FF8 trailer I bought for a log splitter project. Found the truck in about 2 minutes, checked the fluids (all good). RH tank full, LH tank 1/2. Checked batteries (4 fairly new). Sat down in the truck and it fired right up. Pulled over to...

I found it on tpub also, but was wondering if anyone had them in pdf format.

Technical Manuals - Attention Moderators I have the TMs for the M35A3 and would like to add them to the TM library. Several people have asked me for them and emailing is sometimes tough due to size. What do I need to do to add them to the library?

I will be pulling it back with a 1 ton truck so it will not have front trailer brakes either.

To be honest, it would scare the crap out of me to tandem tow two of these 450 miles with no brakes. i would think that any kind of panic stop would be a disaster.